Perform the 45-Degree Miter Cuts
From How to Install Baseboard Along a Staircase Wall · Step 5 of 9 · Video by Home Love Construction

Showing 0:11–0:25 of the source video. Watch the full video with every moment.
What happens in this clip
With the cutting lines accurately marked on both pieces of trim, proceed to make the miter cuts. For an inside miter corner, each piece needs to be cut at a 45-degree angle. The longer edge of the trim (the part that will be visible) should be positioned against the wall, with the cut angling towards the room. Place one marked trim piece securely on a stable surface, such as a workbench or sawhorse. Using a hand saw, specifically a pull saw (like the "Temple Tool Co." brand shown in the video), carefully cut along the marked line at the precise 45-degree angle. Ensure a smooth, consistent stroke. Repeat this process for the second piece of trim, making sure to cut the opposing 45-degree angle correctly so that the two pieces will meet flush to form a perfect 90-degree corner.
Goal: Cut two trim pieces at precise 45-degree angles to form an inside miter joint.
What's used
Tools
- Hand Saw Temple Tool Co.
- Miter box with back saw
- Coping saw (for coping joints)
- Trim (Wood Molding)
- Workbench or Stable Surface
- Clamps and a sturdy table
About the full video
This project demonstrates a precise method for creating a seamless mitered inside corner for trim, such as baseboards or crown molding. It involves accurately marking the cutting lines using the trim pieces themselves as guides and then making precise 45-degree cuts with a hand saw to achieve a tight, professional-looking joint.
Step 5 of 9: Cut Inside and Outside Corners
For corners, you will need to make miter cuts. For an inside corner, set your miter saw to 45 degrees (or the appropriate angle for your corner) and cut away from the piece. For an outside corner, also set your miter saw to 45 degrees but cut towards the piece. The goal is to create two beveled edges that meet perfectly to form the corner. Ensure your cuts are precise, as even a small error will be noticeable.
Every video in How to Install Baseboard Along a Staircase Wall
Step 1: Measure and Plan Baseboard Layout
- 0:21–0:35 Plan Room Layout and Measure Walls
- 0:00–0:24 Measure Wall and Plan Baseboard Layout
- 0:49–2:35 Prepare the Room and Measure Baseboard Lengths
Step 2: Acquire Baseboard Material
Step 3: Prepare the Wall Surface
- 0:16–0:29 Prepare Wall and Floor
- 1:43–2:45 Prepare Wall Surface by Removing Residue
- 0:13–0:18 Test Fit and Refine Cuts
Step 4: Make Initial Straight Cuts
- 0:18–0:22 Measure and Cut Trim
- 0:12–0:14 Make the Horizontal and Second Vertical Cuts
- 0:08–0:11 Extend Marks and Make First Cut
Step 5: Cut Inside and Outside Corners
- 1:33–1:49 Miter Cut for Second Outside Corner Piece
- 0:12–0:19 Cut Miter Joints for Outside Corner
- 0:11–0:25 Perform the 45-Degree Miter Cuts (this video)
Step 6: Dry Fit and Adjust Cuts
- 1:03–1:15 Dry Fit Baseboards Around Room
- 0:18–0:24 Test Fit and Adjust
- 0:19–0:25 Final Dry-Fit and Installation
Step 7: Install the Baseboard Molding
- 8:34–9:59 Install Baseboard
- 0:16–0:22 Mark Stud Locations and Install Baseboard
- 0:08–0:14 Install Baseboards to the Wall
Step 8: Fill Nail Holes and Caulk Gaps
- 1:31–1:41 Fill Nail Holes and Caulk Seams
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 0:00–0:04 Fill Nail Holes with Wood Putty
Step 9: Paint or Finish Baseboard
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 1:41–1:52 Apply Final Touch-Up Paint
- 9:00–9:16 Touch-Up Paint Filled Areas
How to Install Baseboard Along a Staircase Wall
A high-level outline for installing baseboard molding along a staircase wall, including planning, cutting, fitting, and finishing steps.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

