Prepare Wall Surface by Removing Residue
From How to Install Baseboard Along a Staircase Wall · Step 3 of 9 · Video by MatthiasWandel

Showing 1:43–2:45 of the source video. Watch the full video with every moment.
What happens in this clip
Before installing the new baseboards, the existing walls need preparation. The presenter demonstrates scraping off an old paint/caulk ridge left from previous baseboards. This ensures a clean, flat surface for the new baseboards to sit flush against, which is crucial for a professional finish with pre-varnished material.
Goal: Create a clean and smooth wall surface for baseboard installation.
What's used
Tools
- Paint Scraper
About the full video
This project provides a detailed guide on installing custom-made, pre-finished solid oak baseboards, focusing on techniques to achieve a professional fit on existing, potentially imperfect walls and floors. It covers preparation, precise cutting, coping, relief cuts for flexibility, and final nailing, demonstrating advanced woodworking skills for trim installation.
Step 3 of 9: Prepare the Wall Surface
Before installing the baseboard, clean the wall surface along the staircase. Remove any dust, dirt, or cobwebs. If there are any old nails or rough patches, lightly sand them smooth. Ensure the wall is dry and free of debris. This step ensures a clean surface for adhesion and a professional finished look.
Every video in How to Install Baseboard Along a Staircase Wall
Step 1: Measure and Plan Baseboard Layout
- 0:21–0:35 Plan Room Layout and Measure Walls
- 0:00–0:24 Measure Wall and Plan Baseboard Layout
- 0:49–2:35 Prepare the Room and Measure Baseboard Lengths
Step 2: Acquire Baseboard Material
Step 3: Prepare the Wall Surface
- 0:16–0:29 Prepare Wall and Floor
- 1:43–2:45 Prepare Wall Surface by Removing Residue (this video)
- 0:13–0:18 Test Fit and Refine Cuts
Step 4: Make Initial Straight Cuts
- 0:18–0:22 Measure and Cut Trim
- 0:12–0:14 Make the Horizontal and Second Vertical Cuts
- 0:08–0:11 Extend Marks and Make First Cut
Step 5: Cut Inside and Outside Corners
- 1:33–1:49 Miter Cut for Second Outside Corner Piece
- 0:12–0:19 Cut Miter Joints for Outside Corner
- 0:11–0:25 Perform the 45-Degree Miter Cuts
Step 6: Dry Fit and Adjust Cuts
- 1:03–1:15 Dry Fit Baseboards Around Room
- 0:18–0:24 Test Fit and Adjust
- 0:19–0:25 Final Dry-Fit and Installation
Step 7: Install the Baseboard Molding
- 8:34–9:59 Install Baseboard
- 0:16–0:22 Mark Stud Locations and Install Baseboard
- 0:08–0:14 Install Baseboards to the Wall
Step 8: Fill Nail Holes and Caulk Gaps
- 1:31–1:41 Fill Nail Holes and Caulk Seams
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 0:00–0:04 Fill Nail Holes with Wood Putty
Step 9: Paint or Finish Baseboard
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 1:41–1:52 Apply Final Touch-Up Paint
- 9:00–9:16 Touch-Up Paint Filled Areas
How to Install Baseboard Along a Staircase Wall
A high-level outline for installing baseboard molding along a staircase wall, including planning, cutting, fitting, and finishing steps.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

