powered by

This Baseboard Cut Was Earned the Hard Way

Video by Home Love Construction · 1 moment used in Oak Valley Designs's DIY guides · 0:50 long

Moments in this video

  1. 0:11–0:25 Perform the 45-Degree Miter Cuts From How to Install Baseboard Along a Staircase Wall, Step 5: Cut Inside and Outside Corners

    With the cutting lines accurately marked on both pieces of trim, proceed to make the miter cuts. For an inside miter corner, each piece needs to be cut at a 45-degree angle. The longer edge of the trim (the part that will be visible) should be positioned against the wall, with the cut angling towards the room. Place one marked trim piece securely on a stable surface, such as a workbench or sawhorse. Using a hand saw, specifically a pull saw (like the "Temple Tool Co." brand shown in the video), carefully cut along the marked line at the precise 45-degree angle. Ensure a smooth, consistent stroke. Repeat this process for the second piece of trim, making sure to cut the opposing 45-degree angle correctly so that the two pieces will meet flush to form a perfect 90-degree corner.

The guide that use this video

Transcript

0:03 Oh, here we go. Here Here comes some crazy Stop. No. Perfect. Beautiful. 45° angle. >> [snorts] >> That is a good little tip. I mean, you could also just cut the ends of the pieces of trim with a 45°. Now, here's the funny thing about that. He didn't measure the other end, so you don't know if it's cut to the right length at all. That's I mean, that's a cool way to do a 45. I don't know why he's using a hand saw in 2025.

Automatically transcribed from the source video.

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

This Baseboard Cut Was Earned the Hard Way — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.