Final Dry-Fit and Installation
From How to Install Baseboard Along a Staircase Wall · Step 6 of 9 · Video by Hard Work

Showing 0:19–0:25 of the source video. Watch the full video with every moment.
What happens in this clip
Once both baseboard pieces are cut, perform a final dry-fit to ensure that both sections fit together perfectly to form the stair-step corner. If any minor gaps or imperfections are present, make small adjustments using sandpaper or a utility knife to achieve a flush fit. After confirming the precise fit, the baseboards can be permanently installed using appropriate fastening methods such as construction adhesive, finishing nails, or screws, depending on the baseboard material and the wall type. The video visually showcases the final, perfectly fitted pieces, highlighting the 'Professional Accuracy' achieved.
Goal: Securely install the precisely cut baseboard molding
What's used
Tools
- Finishing Nails
- Brad nails with a nail gun
- Screws
- Hammer
- Rubber mallet
- Sandpaper
- Wood file
- Block plane
Materials
- Wood Filler
About the full video
This project provides smart tips for accurately cutting and installing baseboard molding to create a seamless stair-step profile around a corner or obstruction, ensuring a professional and polished finish. The process involves precise marking of the step's rise and run directly onto the baseboard, utilizing a square for straight lines, followed by careful cutting and iterative test-fitting to achieve a snug fit.
Step 6 of 9: Dry Fit and Adjust Cuts
Before permanently installing the baseboard, perform a dry fit. Place all the cut sections along the staircase wall as they would be installed. Check how each piece fits against the wall and how the corners join. Look for any gaps, uneven seams, or pieces that are slightly too long or too short. Make precise adjustments to your cuts as needed to ensure a perfect fit for all sections.
Every video in How to Install Baseboard Along a Staircase Wall
Step 1: Measure and Plan Baseboard Layout
- 0:21–0:35 Plan Room Layout and Measure Walls
- 0:00–0:24 Measure Wall and Plan Baseboard Layout
- 0:49–2:35 Prepare the Room and Measure Baseboard Lengths
Step 2: Acquire Baseboard Material
Step 3: Prepare the Wall Surface
- 0:16–0:29 Prepare Wall and Floor
- 1:43–2:45 Prepare Wall Surface by Removing Residue
- 0:13–0:18 Test Fit and Refine Cuts
Step 4: Make Initial Straight Cuts
- 0:18–0:22 Measure and Cut Trim
- 0:12–0:14 Make the Horizontal and Second Vertical Cuts
- 0:08–0:11 Extend Marks and Make First Cut
Step 5: Cut Inside and Outside Corners
- 1:33–1:49 Miter Cut for Second Outside Corner Piece
- 0:12–0:19 Cut Miter Joints for Outside Corner
- 0:11–0:25 Perform the 45-Degree Miter Cuts
Step 6: Dry Fit and Adjust Cuts
- 1:03–1:15 Dry Fit Baseboards Around Room
- 0:18–0:24 Test Fit and Adjust
- 0:19–0:25 Final Dry-Fit and Installation (this video)
Step 7: Install the Baseboard Molding
- 8:34–9:59 Install Baseboard
- 0:16–0:22 Mark Stud Locations and Install Baseboard
- 0:08–0:14 Install Baseboards to the Wall
Step 8: Fill Nail Holes and Caulk Gaps
- 1:31–1:41 Fill Nail Holes and Caulk Seams
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 0:00–0:04 Fill Nail Holes with Wood Putty
Step 9: Paint or Finish Baseboard
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 1:41–1:52 Apply Final Touch-Up Paint
- 9:00–9:16 Touch-Up Paint Filled Areas
How to Install Baseboard Along a Staircase Wall
A high-level outline for installing baseboard molding along a staircase wall, including planning, cutting, fitting, and finishing steps.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

