Finish Baseboards (Fill, Caulk, Paint)
From How to Install Baseboard Along a Staircase Wall · Step 9 of 9 · Video by Anika's DIY Life

Showing 22:02–25:10 of the source video. Watch the full video with every moment.
What happens in this clip
Once all baseboards are securely installed, the final step is to finish them. Use wood filler to fill all visible nail holes and any minor imperfections in the wood. A helpful tip is to use a wet wipe or damp cloth to smooth out excess wood filler immediately, reducing the need for extensive sanding later. Next, apply a continuous bead of caulk along the top edge of the baseboards where they meet the wall, and also fill any remaining small gaps in the mitered corners. Smooth the caulk bead with a wet finger or a caulk tool. Allow the caulk and wood filler to dry completely as per manufacturer instructions. Finally, paint the baseboards. While freehand painting is possible, for a cleaner line, you can tape off the floor and the wall above the baseboard before painting.
Goal: Complete the baseboard installation by filling nail holes, caulking gaps, and painting for a smooth, professional finish.
What's used
Tools
- Caulk Gun
- Paint Brush
- Small Putty Knife
Materials
- Caulk
- Paint (for baseboards)
- Painter's Tape
- Wet Wipes/Cloth
- Wood Filler
About the full video
This project provides detailed instructions on how to remove old baseboards, install new ones, and finish them for a professional look. It covers essential techniques like accurate measuring, cutting various miter angles for inside and outside corners (including coping and scarf joints), and securely fastening baseboards using brad nails.
What's said in this clip
Yeah. Let's put it together. So, I'm going to start with this scarf joint right here. And I'm going to actually use some painters tape to hold these joints in place for just a little bit. And now I do want to add at least one nail. And this pushed this out. So, we're going to push it back in. But here, anyway, we want to use inch and a quarter nails. Take the tape off. And we have a pretty nice joint. Okay. So, once again, I'm going to use wood glue right here. Make sure there's enough glue on it. Hold it in place for a little bit. Use some tape. That's going to hold it in position. Now, the reason I am taping it rather than nailing it is because usually at the bullnose corners, they use metal sheets to give the corner the shape. And so, you really cannot nail into that. So, instead, I'm just going to use the tape to hold everything in place to dry up. And I'm going to nail all around it. You can see there's a little bit of a gap there. So, popsicle sticks for the rescue. And once the wood glue dries, which is about half an hour, we've got a nice corner. All the baseboards are attached. So now it's time for the final finish. I filled out all of the nail holes with wood filler. And here's a little trick so you don't have to sand a lot. Just use a wet towel to wipe away all of the excess wood filler. I added a bead of cocking all along the baseboards. And to be honest, this is the most satisfying part to me. And when everything was dry, I painted all the baseboards. Now, I am comfortable just doing this freehand, but if you like, you can totally tape off the floor and the wall to get that nice crisp line. And there you have it. Super easy, professional looking results and really beginner friendly. It took me about 6 and 1/2 hours of active work time to do this. Of course, I am also recording video and that just makes everything take a lot longer because I'm adjusting the camera angle, making sure everything's visible. So, everything takes a lot longer. So, I think you could easily do this room in like 3 3 and 1/2 hours. But, a couple things to remember. If you are using a miter saw, make sure that you align it before you start working on this project because that is going to save you so much frustration. And number two, do not assume that the walls are straight at all. Do not assume that the walls are at a 90°. Make sure that you account for the variation. And those popsicle sticks make it so easy to get those clean corners. If you have any questions, leave…
Automatically transcribed from the source video.
Step 9 of 9: Paint or Finish Baseboard
Once the wood filler and caulk have dried, prepare to paint or stain the baseboard. If you are painting, apply a primer first, followed by one or two coats of your chosen paint color. If staining, apply stain evenly and wipe off excess. Ensure you paint or stain carefully to avoid getting any on the walls or adjacent surfaces. For a cleaner line, you can use painter's tape along the edge of the wall before painting.
Every video in How to Install Baseboard Along a Staircase Wall
Step 1: Measure and Plan Baseboard Layout
- 0:21–0:35 Plan Room Layout and Measure Walls
- 0:00–0:24 Measure Wall and Plan Baseboard Layout
- 0:49–2:35 Prepare the Room and Measure Baseboard Lengths
Step 2: Acquire Baseboard Material
Step 3: Prepare the Wall Surface
- 0:16–0:29 Prepare Wall and Floor
- 1:43–2:45 Prepare Wall Surface by Removing Residue
- 0:13–0:18 Test Fit and Refine Cuts
Step 4: Make Initial Straight Cuts
- 0:18–0:22 Measure and Cut Trim
- 0:12–0:14 Make the Horizontal and Second Vertical Cuts
- 0:08–0:11 Extend Marks and Make First Cut
Step 5: Cut Inside and Outside Corners
- 1:33–1:49 Miter Cut for Second Outside Corner Piece
- 0:12–0:19 Cut Miter Joints for Outside Corner
- 0:11–0:25 Perform the 45-Degree Miter Cuts
Step 6: Dry Fit and Adjust Cuts
- 1:03–1:15 Dry Fit Baseboards Around Room
- 0:18–0:24 Test Fit and Adjust
- 0:19–0:25 Final Dry-Fit and Installation
Step 7: Install the Baseboard Molding
- 8:34–9:59 Install Baseboard
- 0:16–0:22 Mark Stud Locations and Install Baseboard
- 0:08–0:14 Install Baseboards to the Wall
Step 8: Fill Nail Holes and Caulk Gaps
- 1:31–1:41 Fill Nail Holes and Caulk Seams
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 0:00–0:04 Fill Nail Holes with Wood Putty
Step 9: Paint or Finish Baseboard
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint) (this video)
- 1:41–1:52 Apply Final Touch-Up Paint
- 9:00–9:16 Touch-Up Paint Filled Areas
How to Install Baseboard Along a Staircase Wall
A high-level outline for installing baseboard molding along a staircase wall, including planning, cutting, fitting, and finishing steps.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

