Apply Final Touch-Up Paint
From How to Install Baseboard Along a Staircase Wall · Step 9 of 9 · Video by Family Handyman

Showing 1:41–1:52 of the source video. Watch the full video with every moment.
What happens in this clip
Once the wood putty and caulk have completely dried (follow manufacturer's drying times), inspect the baseboards. Use a small brush to apply a thin coat of your baseboard paint over any filled nail holes and caulked seams. This final touch-up will hide any evidence of the installation process, making the baseboards look seamless and professionally installed. Pay attention to applying thin coats to avoid visible brush strokes or paint buildup. After this step, your baseboard installation is complete.
Goal: After all putty and caulk have dried, apply a small amount of touch-up paint to seamlessly blend any filled areas or minor imperfections.
What's used
Tools
- Small Paint Brush
Materials
- Baseboard Paint
About the full video
This comprehensive guide demonstrates the process of installing floor baseboards, from initial painting and measurement to cutting, fitting, securing, and final touch-ups. It covers essential steps such as pre-painting baseboards for ease, accurately measuring and marking cuts, utilizing a miter saw for precise angles, preparing the installation area, dry fitting for optimal placement, and finishing with putty, caulk, and touch-up paint for a professional look.
Step 9 of 9: Paint or Finish Baseboard
Once the wood filler and caulk have dried, prepare to paint or stain the baseboard. If you are painting, apply a primer first, followed by one or two coats of your chosen paint color. If staining, apply stain evenly and wipe off excess. Ensure you paint or stain carefully to avoid getting any on the walls or adjacent surfaces. For a cleaner line, you can use painter's tape along the edge of the wall before painting.
Every video in How to Install Baseboard Along a Staircase Wall
Step 1: Measure and Plan Baseboard Layout
- 0:21–0:35 Plan Room Layout and Measure Walls
- 0:00–0:24 Measure Wall and Plan Baseboard Layout
- 0:49–2:35 Prepare the Room and Measure Baseboard Lengths
Step 2: Acquire Baseboard Material
Step 3: Prepare the Wall Surface
- 0:16–0:29 Prepare Wall and Floor
- 1:43–2:45 Prepare Wall Surface by Removing Residue
- 0:13–0:18 Test Fit and Refine Cuts
Step 4: Make Initial Straight Cuts
- 0:18–0:22 Measure and Cut Trim
- 0:12–0:14 Make the Horizontal and Second Vertical Cuts
- 0:08–0:11 Extend Marks and Make First Cut
Step 5: Cut Inside and Outside Corners
- 1:33–1:49 Miter Cut for Second Outside Corner Piece
- 0:12–0:19 Cut Miter Joints for Outside Corner
- 0:11–0:25 Perform the 45-Degree Miter Cuts
Step 6: Dry Fit and Adjust Cuts
- 1:03–1:15 Dry Fit Baseboards Around Room
- 0:18–0:24 Test Fit and Adjust
- 0:19–0:25 Final Dry-Fit and Installation
Step 7: Install the Baseboard Molding
- 8:34–9:59 Install Baseboard
- 0:16–0:22 Mark Stud Locations and Install Baseboard
- 0:08–0:14 Install Baseboards to the Wall
Step 8: Fill Nail Holes and Caulk Gaps
- 1:31–1:41 Fill Nail Holes and Caulk Seams
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 0:00–0:04 Fill Nail Holes with Wood Putty
Step 9: Paint or Finish Baseboard
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 1:41–1:52 Apply Final Touch-Up Paint (this video)
- 9:00–9:16 Touch-Up Paint Filled Areas
How to Install Baseboard Along a Staircase Wall
A high-level outline for installing baseboard molding along a staircase wall, including planning, cutting, fitting, and finishing steps.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

