Understand Baseboard Types and Dimensions
From How to Install Baseboard Along a Staircase Wall · Step 2 of 9 · Video by Jesse does DIY

Showing 0:21–2:06 of the source video. Watch the full video with every moment.
What happens in this clip
The video begins by introducing the project of installing baseboards and highlighting the benefits of doing it yourself, such as saving money. It then covers the three main types of baseboard materials: plastic (not recommended due to poor quality), MDF (Medium-Density Fiberboard, which is common and economical, used by the presenter), and real wood. Real wood is aesthetically pleasing but more expensive and unnecessary if painting it white, as it will look similar to MDF. The video also discusses different profiles (router-designed vs. flat stock) and common dimensions for thickness (1/2 inch, 5/8 inch, 3/4 inch) and height (2.5 inches to 7 inches, with 3.5 inches being most common). The presenter shows a bundle of 10 eight-foot sections of MDF baseboard, totaling 80 linear feet, which is an economical option for buying in bulk.
Goal: Choose the appropriate type and dimensions of baseboard for your project.
What's used
Materials
- MDF Baseboard VALUPAK (Alexandria Moulding)
- Composite trim (not thin plastic)
About the full video
This project provides comprehensive instructions on how to install and finish baseboards, covering different types of baseboards, necessary tools, pre-finishing techniques, various corner types (butt joints, mitered joints for inside and outside corners), scarf joints for long walls, and final finishing steps like caulking, filling nail holes, and touch-up painting.
Step 2 of 9: Acquire Baseboard Material
Based on the total length calculated in the planning phase, purchase the necessary baseboard molding. Ensure you buy slightly more than you measured to account for any mistakes or complex cuts. Consider the style and profile of the baseboard that best complements your home's decor. Different materials like MDF, pine, or poplar are available, each with its own characteristics for cutting and finishing.
Every video in How to Install Baseboard Along a Staircase Wall
Step 1: Measure and Plan Baseboard Layout
- 0:21–0:35 Plan Room Layout and Measure Walls
- 0:00–0:24 Measure Wall and Plan Baseboard Layout
- 0:49–2:35 Prepare the Room and Measure Baseboard Lengths
Step 2: Acquire Baseboard Material
- 0:21–2:06 Understand Baseboard Types and Dimensions (this video)
- 0:39–1:06 Prepare Existing Baseboards for Upgrade
- 3:51–7:38 Select and Purchase Polystyrene Baseboard
Step 3: Prepare the Wall Surface
- 0:16–0:29 Prepare Wall and Floor
- 1:43–2:45 Prepare Wall Surface by Removing Residue
- 0:13–0:18 Test Fit and Refine Cuts
Step 4: Make Initial Straight Cuts
- 0:18–0:22 Measure and Cut Trim
- 0:12–0:14 Make the Horizontal and Second Vertical Cuts
- 0:08–0:11 Extend Marks and Make First Cut
Step 5: Cut Inside and Outside Corners
- 1:33–1:49 Miter Cut for Second Outside Corner Piece
- 0:12–0:19 Cut Miter Joints for Outside Corner
- 0:11–0:25 Perform the 45-Degree Miter Cuts
Step 6: Dry Fit and Adjust Cuts
- 1:03–1:15 Dry Fit Baseboards Around Room
- 0:18–0:24 Test Fit and Adjust
- 0:19–0:25 Final Dry-Fit and Installation
Step 7: Install the Baseboard Molding
- 8:34–9:59 Install Baseboard
- 0:16–0:22 Mark Stud Locations and Install Baseboard
- 0:08–0:14 Install Baseboards to the Wall
Step 8: Fill Nail Holes and Caulk Gaps
- 1:31–1:41 Fill Nail Holes and Caulk Seams
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 0:00–0:04 Fill Nail Holes with Wood Putty
Step 9: Paint or Finish Baseboard
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 1:41–1:52 Apply Final Touch-Up Paint
- 9:00–9:16 Touch-Up Paint Filled Areas
How to Install Baseboard Along a Staircase Wall
A high-level outline for installing baseboard molding along a staircase wall, including planning, cutting, fitting, and finishing steps.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

