Prepare Existing Baseboards for Upgrade
From How to Install Baseboard Along a Staircase Wall · Step 2 of 9 · Video by Oak & Grain by Jess

Showing 0:39–1:06 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by thoroughly cleaning the existing baseboards with a cleaner/degreaser and a cloth to remove any dirt or grime. Then, measure the perimeter of the area where the new trim will be installed to determine the quantity of base cap molding needed. After measurements are complete, lay down plastic tarps to protect the flooring from paint spills and debris.
Goal: The first step involves cleaning the existing baseboards, measuring the perimeter to determine material needs, and preparing the workspace for painting by laying down tarps.
What's used
Tools
- Pen
- Tape Measure
Materials
- Krud Kutter Cleaner/Degreaser Krud Kutter
- Microfiber Cloth
- Plastic Tarp
About the full video
This project details how to upgrade existing baseboards to create the illusion of taller baseboards without demolition. It involves cleaning, painting, purchasing and painting new trim, installing the trim with brad nails, and finishing with caulk and final paint coats.
Step 2 of 9: Acquire Baseboard Material
Based on the total length calculated in the planning phase, purchase the necessary baseboard molding. Ensure you buy slightly more than you measured to account for any mistakes or complex cuts. Consider the style and profile of the baseboard that best complements your home's decor. Different materials like MDF, pine, or poplar are available, each with its own characteristics for cutting and finishing.
Every video in How to Install Baseboard Along a Staircase Wall
Step 1: Measure and Plan Baseboard Layout
- 0:21–0:35 Plan Room Layout and Measure Walls
- 0:00–0:24 Measure Wall and Plan Baseboard Layout
- 0:49–2:35 Prepare the Room and Measure Baseboard Lengths
Step 2: Acquire Baseboard Material
- 0:21–2:06 Understand Baseboard Types and Dimensions
- 0:39–1:06 Prepare Existing Baseboards for Upgrade (this video)
- 3:51–7:38 Select and Purchase Polystyrene Baseboard
Step 3: Prepare the Wall Surface
- 0:16–0:29 Prepare Wall and Floor
- 1:43–2:45 Prepare Wall Surface by Removing Residue
- 0:13–0:18 Test Fit and Refine Cuts
Step 4: Make Initial Straight Cuts
- 0:18–0:22 Measure and Cut Trim
- 0:12–0:14 Make the Horizontal and Second Vertical Cuts
- 0:08–0:11 Extend Marks and Make First Cut
Step 5: Cut Inside and Outside Corners
- 1:33–1:49 Miter Cut for Second Outside Corner Piece
- 0:12–0:19 Cut Miter Joints for Outside Corner
- 0:11–0:25 Perform the 45-Degree Miter Cuts
Step 6: Dry Fit and Adjust Cuts
- 1:03–1:15 Dry Fit Baseboards Around Room
- 0:18–0:24 Test Fit and Adjust
- 0:19–0:25 Final Dry-Fit and Installation
Step 7: Install the Baseboard Molding
- 8:34–9:59 Install Baseboard
- 0:16–0:22 Mark Stud Locations and Install Baseboard
- 0:08–0:14 Install Baseboards to the Wall
Step 8: Fill Nail Holes and Caulk Gaps
- 1:31–1:41 Fill Nail Holes and Caulk Seams
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 0:00–0:04 Fill Nail Holes with Wood Putty
Step 9: Paint or Finish Baseboard
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 1:41–1:52 Apply Final Touch-Up Paint
- 9:00–9:16 Touch-Up Paint Filled Areas
How to Install Baseboard Along a Staircase Wall
A high-level outline for installing baseboard molding along a staircase wall, including planning, cutting, fitting, and finishing steps.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

