Install Baseboard
From How to Install Baseboard Along a Staircase Wall · Step 7 of 9 · Video by Stud Pack

Showing 8:34–9:59 of the source video. Watch the full video with every moment.
What happens in this clip
Apply a bead of construction adhesive (e.g., Liquid Nails) to the back of each pre-cut baseboard piece. Carefully place the baseboard against the wall, aligning its square edge with the floor. Use a nail gun to secure the baseboard to the wall, driving nails into studs every 16 inches. The nails act as clamps, holding the baseboard in place while the adhesive dries. This method helps overcome imperfections in old walls, ensuring the baseboard appears straight and level, even if the original drywall has 'waves.' For corners and specific termination points (like cabinet face frames or door casings), cut the baseboard to fit precisely.
Goal: Securely attach the baseboard to the bathroom walls.
What's used
Tools
- Caulk Gun
- Construction Adhesive Liquid Nails
- Nail Gun
- Nails (18-gauge brad nails)
- Polystyrene Baseboard Pieces
About the full video
This project provides a comprehensive guide to selecting, preparing, and installing waterproof baseboards in a bathroom, focusing on alternatives to traditional wood or MDF to prevent water damage. It covers options like tile, stone, and polystyrene, demonstrating the installation process from measuring to priming, highlighting techniques for dealing with uneven walls and achieving a professional finish.
Step 7 of 9: Install the Baseboard Molding
Once you are satisfied with the fit, begin the permanent installation. Apply a bead of construction adhesive to the back of each baseboard section. Then, press the molding firmly against the wall. For added security, use a nail gun with finishing nails to secure the baseboard to the wall studs. Drive the nails flush or slightly below the surface of the molding. Work from one end of the staircase to the other, ensuring each piece is aligned correctly.
Every video in How to Install Baseboard Along a Staircase Wall
Step 1: Measure and Plan Baseboard Layout
- 0:21–0:35 Plan Room Layout and Measure Walls
- 0:00–0:24 Measure Wall and Plan Baseboard Layout
- 0:49–2:35 Prepare the Room and Measure Baseboard Lengths
Step 2: Acquire Baseboard Material
Step 3: Prepare the Wall Surface
- 0:16–0:29 Prepare Wall and Floor
- 1:43–2:45 Prepare Wall Surface by Removing Residue
- 0:13–0:18 Test Fit and Refine Cuts
Step 4: Make Initial Straight Cuts
- 0:18–0:22 Measure and Cut Trim
- 0:12–0:14 Make the Horizontal and Second Vertical Cuts
- 0:08–0:11 Extend Marks and Make First Cut
Step 5: Cut Inside and Outside Corners
- 1:33–1:49 Miter Cut for Second Outside Corner Piece
- 0:12–0:19 Cut Miter Joints for Outside Corner
- 0:11–0:25 Perform the 45-Degree Miter Cuts
Step 6: Dry Fit and Adjust Cuts
- 1:03–1:15 Dry Fit Baseboards Around Room
- 0:18–0:24 Test Fit and Adjust
- 0:19–0:25 Final Dry-Fit and Installation
Step 7: Install the Baseboard Molding
- 8:34–9:59 Install Baseboard (this video)
- 0:16–0:22 Mark Stud Locations and Install Baseboard
- 0:08–0:14 Install Baseboards to the Wall
Step 8: Fill Nail Holes and Caulk Gaps
- 1:31–1:41 Fill Nail Holes and Caulk Seams
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 0:00–0:04 Fill Nail Holes with Wood Putty
Step 9: Paint or Finish Baseboard
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 1:41–1:52 Apply Final Touch-Up Paint
- 9:00–9:16 Touch-Up Paint Filled Areas
How to Install Baseboard Along a Staircase Wall
A high-level outline for installing baseboard molding along a staircase wall, including planning, cutting, fitting, and finishing steps.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

