Fill Nail Holes and Caulk Seams
From How to Install Baseboard Along a Staircase Wall · Step 8 of 9 · Video by Family Handyman

Showing 1:31–1:41 of the source video. Watch the full video with every moment.
What happens in this clip
After securing the baseboards, use wood putty to fill all visible nail holes. Apply a small amount of putty, pressing it into the hole with your finger or a putty knife, then wipe away excess. Once the putty is dry, lightly sand the areas smooth so they are flush with the baseboard surface. Next, use a caulk gun to apply a bead of paintable caulk along the top edge where the baseboard meets the wall, and along any mitered corners or seams where two pieces meet. Smooth the caulk with a wet finger or a caulking tool for a clean, professional line. This step fills small gaps and seals the baseboards, preparing them for final paint touch-ups.
Goal: Fill all nail holes with wood putty, sand smooth, then apply caulk along the top edge of the baseboards and any seams or corners for a seamless finish.
What's used
Tools
- Caulk Gun
- Putty Knife
- Sanding Sponge or Fine-grit Sandpaper
Materials
- Paintable Caulk
- Wood Putty
About the full video
This comprehensive guide demonstrates the process of installing floor baseboards, from initial painting and measurement to cutting, fitting, securing, and final touch-ups. It covers essential steps such as pre-painting baseboards for ease, accurately measuring and marking cuts, utilizing a miter saw for precise angles, preparing the installation area, dry fitting for optimal placement, and finishing with putty, caulk, and touch-up paint for a professional look.
Step 8 of 9: Fill Nail Holes and Caulk Gaps
After the baseboard is securely installed, fill all nail holes with wood filler or putty. Use a putty knife to apply the filler, then smooth it over. Once the filler is dry, lightly sand the areas smooth. Next, apply a thin bead of paintable caulk along the top edge where the baseboard meets the wall, and in any other small gaps or seams. Smooth the caulk line with your finger or a damp cloth for a clean, finished look.
Every video in How to Install Baseboard Along a Staircase Wall
Step 1: Measure and Plan Baseboard Layout
- 0:21–0:35 Plan Room Layout and Measure Walls
- 0:00–0:24 Measure Wall and Plan Baseboard Layout
- 0:49–2:35 Prepare the Room and Measure Baseboard Lengths
Step 2: Acquire Baseboard Material
Step 3: Prepare the Wall Surface
- 0:16–0:29 Prepare Wall and Floor
- 1:43–2:45 Prepare Wall Surface by Removing Residue
- 0:13–0:18 Test Fit and Refine Cuts
Step 4: Make Initial Straight Cuts
- 0:18–0:22 Measure and Cut Trim
- 0:12–0:14 Make the Horizontal and Second Vertical Cuts
- 0:08–0:11 Extend Marks and Make First Cut
Step 5: Cut Inside and Outside Corners
- 1:33–1:49 Miter Cut for Second Outside Corner Piece
- 0:12–0:19 Cut Miter Joints for Outside Corner
- 0:11–0:25 Perform the 45-Degree Miter Cuts
Step 6: Dry Fit and Adjust Cuts
- 1:03–1:15 Dry Fit Baseboards Around Room
- 0:18–0:24 Test Fit and Adjust
- 0:19–0:25 Final Dry-Fit and Installation
Step 7: Install the Baseboard Molding
- 8:34–9:59 Install Baseboard
- 0:16–0:22 Mark Stud Locations and Install Baseboard
- 0:08–0:14 Install Baseboards to the Wall
Step 8: Fill Nail Holes and Caulk Gaps
- 1:31–1:41 Fill Nail Holes and Caulk Seams (this video)
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 0:00–0:04 Fill Nail Holes with Wood Putty
Step 9: Paint or Finish Baseboard
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 1:41–1:52 Apply Final Touch-Up Paint
- 9:00–9:16 Touch-Up Paint Filled Areas
Questions about How to Install Baseboard Along a Staircase Wall
How difficult is installing baseboard on a staircase, and how long does it typically take?
This project is rated 'beginner' but the angled cuts required for a staircase wall add complexity. Expect to spend around 8 hours, but it could take longer for your first time or if the staircase has multiple turns. Patience with measurement and cutting is crucial for a professional finish.
What specialized tools do I need for the angled cuts on a staircase?
A miter box and saw set is essential for precise angled cuts, accommodating both the staircase incline and any inside/outside corners. A level will help ensure your baseboard is installed straight along the wall. Don't forget a reliable measuring tape and a pencil for accurate marking.
What's the best way to get accurate angles for the baseboard along the staircase slope?
Use a digital angle finder or a bevel gauge to precisely measure the angle of your staircase treads and where the baseboard will meet. Transfer these exact angles to your miter saw for cutting. Always double-check your measurements and dry-fit before final installation.
I'm worried about gaps where the baseboard meets the wall or other pieces. How can I avoid this?
Precise measuring and cutting are paramount; dry-fit each piece before securing it to identify and correct any gaps. For minor gaps, wood filler and paintable caulk are your best friends. Apply them neatly after installation and before painting for a seamless, finished look.
Can I use different types of baseboard for this project, and what about fastening methods?
MDF baseboard, as listed, is a cost-effective and easy-to-work-with option, but solid wood can also be used. For fastening, a combination of construction adhesive for strong, permanent bonding and finishing nails for immediate hold is generally recommended for durability on stairs.
What safety precautions should I take when installing baseboard, especially on stairs?
Always wear safety glasses when making cuts, especially with a miter saw. Ensure your work area on the stairs is clear and stable to prevent falls or slips. If using any power tools, always read the manual and keep hands clear of moving blades.
How to Install Baseboard Along a Staircase Wall
A high-level outline for installing baseboard molding along a staircase wall, including planning, cutting, fitting, and finishing steps.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

