Touch-Up Paint Filled Areas
From How to Install Baseboard Along a Staircase Wall · Step 9 of 9 · Video by Builds by Maz

Showing 9:00–9:16 of the source video. Watch the full video with every moment.
What happens in this clip
Once the wood filler is dry and any necessary sanding is complete, use a small paintbrush and the same urethane trim enamel paint from earlier to touch up all the filled areas. You may need to apply two coats of paint to ensure the wood filler is fully covered and blends seamlessly with the rest of the baseboard. If you're touching up along a seam, you might want to use painter's tape on the wall to ensure a clean line and prevent paint from getting on the wall.
Goal: Conceal filled areas with touch-up paint
What's used
Tools
- Painter's Tape
- Small Paintbrush
Materials
- Urethane Trim Enamel Paint Sherwin Williams Emerald
About the full video
This project provides comprehensive instructions on how to install baseboards, focusing on achieving a professional and seamless finish. It covers everything from preparing the baseboards by painting them, locating wall studs for secure attachment, and handling various types of corners including inside, outside, and challenging bullnose corners. The guide also details finishing touches like filling nail holes, touching up paint, and caulking the top edge for a polished look.
Step 9 of 9: Paint or Finish Baseboard
Once the wood filler and caulk have dried, prepare to paint or stain the baseboard. If you are painting, apply a primer first, followed by one or two coats of your chosen paint color. If staining, apply stain evenly and wipe off excess. Ensure you paint or stain carefully to avoid getting any on the walls or adjacent surfaces. For a cleaner line, you can use painter's tape along the edge of the wall before painting.
Every video in How to Install Baseboard Along a Staircase Wall
Step 1: Measure and Plan Baseboard Layout
- 0:21–0:35 Plan Room Layout and Measure Walls
- 0:00–0:24 Measure Wall and Plan Baseboard Layout
- 0:49–2:35 Prepare the Room and Measure Baseboard Lengths
Step 2: Acquire Baseboard Material
Step 3: Prepare the Wall Surface
- 0:16–0:29 Prepare Wall and Floor
- 1:43–2:45 Prepare Wall Surface by Removing Residue
- 0:13–0:18 Test Fit and Refine Cuts
Step 4: Make Initial Straight Cuts
- 0:18–0:22 Measure and Cut Trim
- 0:12–0:14 Make the Horizontal and Second Vertical Cuts
- 0:08–0:11 Extend Marks and Make First Cut
Step 5: Cut Inside and Outside Corners
- 1:33–1:49 Miter Cut for Second Outside Corner Piece
- 0:12–0:19 Cut Miter Joints for Outside Corner
- 0:11–0:25 Perform the 45-Degree Miter Cuts
Step 6: Dry Fit and Adjust Cuts
- 1:03–1:15 Dry Fit Baseboards Around Room
- 0:18–0:24 Test Fit and Adjust
- 0:19–0:25 Final Dry-Fit and Installation
Step 7: Install the Baseboard Molding
- 8:34–9:59 Install Baseboard
- 0:16–0:22 Mark Stud Locations and Install Baseboard
- 0:08–0:14 Install Baseboards to the Wall
Step 8: Fill Nail Holes and Caulk Gaps
- 1:31–1:41 Fill Nail Holes and Caulk Seams
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 0:00–0:04 Fill Nail Holes with Wood Putty
Step 9: Paint or Finish Baseboard
- 22:02–25:10 Finish Baseboards (Fill, Caulk, Paint)
- 1:41–1:52 Apply Final Touch-Up Paint
- 9:00–9:16 Touch-Up Paint Filled Areas (this video)
How to Install Baseboard Along a Staircase Wall
A high-level outline for installing baseboard molding along a staircase wall, including planning, cutting, fitting, and finishing steps.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

