Mix Concrete Resurfacing Product
From How to Resurface Worn Concrete Steps · Step 4 of 6 · Video by Andrew Thron Improvements

Showing 0:13–0:21 of the source video. Watch the full video with every moment.
What happens in this clip
Prepare the concrete resurfacing product according to the manufacturer's specific instructions. This typically involves mixing the dry powdered resurfacing material with a precise amount of water and often a liquid additive in a large mixing bucket. Use a drill equipped with a mixing paddle to thoroughly combine the ingredients until the mixture achieves a smooth, consistent texture similar to 'pancake batter', ensuring there are no lumps.
Goal: Prepare the resurfacing mixture to the correct consistency
What's used
Tools
- Drill RIDGID
- Large Mixing Bucket The Home Depot
- Mixing Paddle
- Work Gloves Firm Grip A1
Materials
- Concrete Resurfacing Product Rapid Set New-Crete
- Quikrete Concrete Resurfacer
- Liquid Additive
- adhesion
- flexibility).
- Water
About the full video
This project guides you through revitalizing old, worn concrete surfaces, specifically porch steps, using a concrete resurfacing product. The process includes removing old fixtures, thorough cleaning, mixing and applying a thin layer of resurfacing material, and optionally adding a broom finish and concrete sealer for durability and aesthetics.
Step 4 of 6: Mix and Apply Concrete Resurfacer
In a clean mixing bucket, combine the concrete resurfacer powder with the recommended amount of clean water. Mix thoroughly with a drill equipped with a mixing paddle until a lump-free, workable consistency is achieved. The mixture should be like thick pancake batter. Immediately after mixing, pour the resurfacer onto the primed step and spread it evenly using a squeegee or trowel. Work from the top step downwards. Ensure consistent thickness across all surfaces.
Every video in How to Resurface Worn Concrete Steps
Step 1: Inspect and Clean Concrete Steps
- 0:35–0:58 Clean and Prepare Damaged Steps
- 0:13–0:35 Clean Concrete Stairs
- 1:19–2:05 Cleaning the Concrete Surface
Step 2: Repair Cracks and Damage
- 1:07–1:26 Fill Concrete Cracks
- 2:52–3:20 Apply and Level Patching Compound
- 0:00–0:10 Apply Crack Filler
Step 3: Prime the Surface
- 4:24–5:41 Prime the Concrete Surface
- 0:04–0:09 Prepare and Prime the Concrete Surface
- 4:17–5:40 Apply Concrete Bonding Adhesive
Step 4: Mix and Apply Concrete Resurfacer
- 0:13–0:21 Mix Concrete Resurfacing Product (this video)
- 2:22–3:19 Apply and Texture Concrete Resurfacer
- 0:21–0:39 Apply Thin Layer of Resurfacer
Step 5: Texture and Finish
- 16:32–16:40 Achieve Desired Finish
- 0:40–0:45 Apply Broom Finish (Optional)
- 1:16–1:25 Apply Textured Finish
Step 6: Cure the Resurfacer
- 0:33–0:40 Cure Resurfaced Concrete
- 0:12–0:15 Cure and Inspect
- 0:54–1:02 Cure Resurfaced Steps
How to Resurface Worn Concrete Steps
This project outlines the steps to resurface worn concrete steps, including cleaning, repairing cracks, applying a bonding agent, and finishing with a concrete resurfacer product.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

