Cure and Inspect
From How to Resurface Worn Concrete Steps · Step 6 of 6 · Video by Leggari Products

Showing 0:12–0:15 of the source video. Watch the full video with every moment.
What happens in this clip
Allow the newly applied concrete resurfacer to cure completely. Refer to the manufacturer's instructions for specific drying and curing times, which can vary based on product type, temperature, and humidity. Typically, light foot traffic may be permitted after several hours, but full strength and durability require a longer curing period, often 24 hours or more. Once fully cured, inspect the surface for a smooth, uniform, and refreshed appearance, indicative of a successful resurfacing project.
Goal: Achieve a fully cured and refreshed concrete surface
About the full video
This project provides a step-by-step guide on how to refresh and repair old, damaged concrete surfaces. The process involves thoroughly cleaning the existing concrete, preparing a liquid concrete resurfacer, and then pouring and spreading it evenly to create a new, smooth, and revitalized finish.
What's said in this clip
[Music] eyes Ling like this it's B to crash summer Al spin his fast stay with the feeling while it Li cuz you're my sugar you're my sugar he
Automatically transcribed from the source video.
Step 6 of 6: Cure the Resurfacer
Protect the newly resurfaced steps from direct sunlight, rain, and heavy foot traffic. The curing process typically takes 24-72 hours, but check the specific product's instructions for the recommended curing time and method. Some products may recommend misting the surface with water periodically during the first few days of curing to ensure optimal hydration.
Every video in How to Resurface Worn Concrete Steps
Step 1: Inspect and Clean Concrete Steps
- 0:35–0:58 Clean and Prepare Damaged Steps
- 0:13–0:35 Clean Concrete Stairs
- 1:19–2:05 Cleaning the Concrete Surface
Step 2: Repair Cracks and Damage
- 1:07–1:26 Fill Concrete Cracks
- 2:52–3:20 Apply and Level Patching Compound
- 0:00–0:10 Apply Crack Filler
Step 3: Prime the Surface
- 4:24–5:41 Prime the Concrete Surface
- 0:04–0:09 Prepare and Prime the Concrete Surface
- 4:17–5:40 Apply Concrete Bonding Adhesive
Step 4: Mix and Apply Concrete Resurfacer
- 0:13–0:21 Mix Concrete Resurfacing Product
- 2:22–3:19 Apply and Texture Concrete Resurfacer
- 0:21–0:39 Apply Thin Layer of Resurfacer
Step 5: Texture and Finish
- 16:32–16:40 Achieve Desired Finish
- 0:40–0:45 Apply Broom Finish (Optional)
- 1:16–1:25 Apply Textured Finish
Step 6: Cure the Resurfacer
- 0:33–0:40 Cure Resurfaced Concrete
- 0:12–0:15 Cure and Inspect (this video)
- 0:54–1:02 Cure Resurfaced Steps
How to Resurface Worn Concrete Steps
This project outlines the steps to resurface worn concrete steps, including cleaning, repairing cracks, applying a bonding agent, and finishing with a concrete resurfacer product.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

