powered by

Cure Resurfaced Concrete

From How to Resurface Worn Concrete Steps · Step 6 of 6 · Video by CTSRapidSet

Showing 0:33–0:40 of the source video. Watch the full video with every moment.

What happens in this clip

After all finishing touches are complete, it is crucial to allow the "Rapid Set NewCrete" concrete resurfacer to cure properly. Follow the manufacturer's recommendations for curing, which often involves keeping the surface moist for a specified period (e.g., several hours to a day) or using a curing compound. This step is essential for the resurfacer to achieve its maximum strength, durability, and crack resistance. During the critical curing phase, protect the newly resurfaced area from heavy foot traffic, vehicle loads, extreme temperatures (both hot and cold), and direct, intense sunlight. The product label shown indicates "FAST STRONG DURABLE," highlighting the importance of proper curing.

Goal: Allow the resurfacer to cure properly for maximum strength and durability.

About the full video

This project demonstrates the application of Rapid Set NewCrete Concrete Resurfacer to refresh and repair existing concrete surfaces. The process includes mixing the resurfacer, pouring it onto a prepared damp surface, spreading it with a squeegee, and finishing it with a trowel and broom to achieve a smooth and textured appearance.

Step 6 of 6: Cure the Resurfacer

Protect the newly resurfaced steps from direct sunlight, rain, and heavy foot traffic. The curing process typically takes 24-72 hours, but check the specific product's instructions for the recommended curing time and method. Some products may recommend misting the surface with water periodically during the first few days of curing to ensure optimal hydration.

Open this step in the guide

Every video in How to Resurface Worn Concrete Steps

  1. Step 1: Inspect and Clean Concrete Steps

  2. Step 2: Repair Cracks and Damage

  3. Step 3: Prime the Surface

  4. Step 4: Mix and Apply Concrete Resurfacer

  5. Step 5: Texture and Finish

  6. Step 6: Cure the Resurfacer

How to Resurface Worn Concrete Steps

This project outlines the steps to resurface worn concrete steps, including cleaning, repairing cracks, applying a bonding agent, and finishing with a concrete resurfacer product.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Cure Resurfaced Concrete — How to Resurface Worn Concrete Steps | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.