Prepare and Prime the Concrete Surface
From How to Resurface Worn Concrete Steps · Step 3 of 6 · Video by Concrete Craft

Showing 0:04–0:09 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by thoroughly cleaning the existing concrete surface to ensure optimal adhesion for the subsequent layers. This involves removing all dirt, grime, oil stains, and loose debris, often accomplished using a high-pressure washer, followed by sweeping or scrubbing. Once the surface is clean and dry, apply a polymer-modified rubberized polymer bond coat (primer). This specialized primer is crucial for creating a strong adhesive bond between the old concrete and the new overlay material. Use a roller with an extension handle for broad areas and a paintbrush for edges, corners, and areas adjacent to walls, ensuring complete and even coverage of the surface. Allow the primer to dry according to the manufacturer's specifications before proceeding.
Goal: Ensure a clean and properly bonded surface for the overlay.
What's used
Tools
- Broom/Push Broom
- Bucket (for primer)
- Paint Roller (with extension handle)
- Paintbrush
- corners
- and detailed areas.
- Pressure Washer
- Concrete scrubber machine
Materials
- Concrete Cleaner/Degreaser
- Commercial concrete cleaner
- Polymer-Modified Rubberized Polymer Bond Coat (Primer) Concrete Craft
- Epoxy primer
About the full video
This project provides comprehensive, verbose instructions for transforming a plain concrete surface into an aesthetically pleasing, natural stone-like appearance using a specialized polymer-modified overlay system. The process encompasses thorough cleaning and priming of the existing concrete, precise mixing and application of a fiber-enriched overlay, intricate texturing with stamping mats, meticulous hand-carving of individual stone patterns, custom UV-resistant coloring to mimic natural rock, and a final protective sealing for enhanced durability and low maintenance. This DIY project allows for the creation of unique, custom-designed outdoor living spaces, pool decks, and driveways with the look and feel of natural stone.
Step 3 of 6: Prime the Surface
Once the repairs are fully cured and the surface is dry, apply a concrete bonding agent or primer according to the manufacturer's instructions. This is typically brushed or rolled onto the concrete. Ensure complete coverage, paying attention to edges and corners. This step is crucial for creating a strong bond between the old concrete and the new resurfacing material.
Every video in How to Resurface Worn Concrete Steps
Step 1: Inspect and Clean Concrete Steps
- 0:35–0:58 Clean and Prepare Damaged Steps
- 0:13–0:35 Clean Concrete Stairs
- 1:19–2:05 Cleaning the Concrete Surface
Step 2: Repair Cracks and Damage
- 1:07–1:26 Fill Concrete Cracks
- 2:52–3:20 Apply and Level Patching Compound
- 0:00–0:10 Apply Crack Filler
Step 3: Prime the Surface
- 4:24–5:41 Prime the Concrete Surface
- 0:04–0:09 Prepare and Prime the Concrete Surface (this video)
- 4:17–5:40 Apply Concrete Bonding Adhesive
Step 4: Mix and Apply Concrete Resurfacer
- 0:13–0:21 Mix Concrete Resurfacing Product
- 2:22–3:19 Apply and Texture Concrete Resurfacer
- 0:21–0:39 Apply Thin Layer of Resurfacer
Step 5: Texture and Finish
- 16:32–16:40 Achieve Desired Finish
- 0:40–0:45 Apply Broom Finish (Optional)
- 1:16–1:25 Apply Textured Finish
Step 6: Cure the Resurfacer
- 0:33–0:40 Cure Resurfaced Concrete
- 0:12–0:15 Cure and Inspect
- 0:54–1:02 Cure Resurfaced Steps
How to Resurface Worn Concrete Steps
This project outlines the steps to resurface worn concrete steps, including cleaning, repairing cracks, applying a bonding agent, and finishing with a concrete resurfacer product.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

