Apply Broom Finish (Optional)
From How to Resurface Worn Concrete Steps · Step 5 of 6 · Video by Andrew Thron Improvements

Showing 0:40–0:45 of the source video. Watch the full video with every moment.
What happens in this clip
If desired, apply a broom finish to the freshly applied resurfacing product while it is still wet. This is done by lightly dragging a concrete finishing broom across the surface. This technique creates a textured look that enhances traction, making the concrete less slippery, especially when wet.
Goal: Add a non-slip texture to the concrete surface
What's used
Tools
- Concrete Finishing Broom
- non-slip finish on the wet resurfacing product.
About the full video
This project guides you through revitalizing old, worn concrete surfaces, specifically porch steps, using a concrete resurfacing product. The process includes removing old fixtures, thorough cleaning, mixing and applying a thin layer of resurfacing material, and optionally adding a broom finish and concrete sealer for durability and aesthetics.
Step 5 of 6: Texture and Finish
While the resurfacer is still wet, use a broom, stiff brush, or specialized texturing tools to create the desired finish. A broom can create subtle lines, while a trowel can be used for smoother finishes or to create patterns. Work from the top step down. Smooth any ridges or uneven areas with a trowel as needed. Ensure all edges are neat and tidy.
Every video in How to Resurface Worn Concrete Steps
Step 1: Inspect and Clean Concrete Steps
- 0:35–0:58 Clean and Prepare Damaged Steps
- 0:13–0:35 Clean Concrete Stairs
- 1:19–2:05 Cleaning the Concrete Surface
Step 2: Repair Cracks and Damage
- 1:07–1:26 Fill Concrete Cracks
- 2:52–3:20 Apply and Level Patching Compound
- 0:00–0:10 Apply Crack Filler
Step 3: Prime the Surface
- 4:24–5:41 Prime the Concrete Surface
- 0:04–0:09 Prepare and Prime the Concrete Surface
- 4:17–5:40 Apply Concrete Bonding Adhesive
Step 4: Mix and Apply Concrete Resurfacer
- 0:13–0:21 Mix Concrete Resurfacing Product
- 2:22–3:19 Apply and Texture Concrete Resurfacer
- 0:21–0:39 Apply Thin Layer of Resurfacer
Step 5: Texture and Finish
- 16:32–16:40 Achieve Desired Finish
- 0:40–0:45 Apply Broom Finish (Optional) (this video)
- 1:16–1:25 Apply Textured Finish
Step 6: Cure the Resurfacer
- 0:33–0:40 Cure Resurfaced Concrete
- 0:12–0:15 Cure and Inspect
- 0:54–1:02 Cure Resurfaced Steps
How to Resurface Worn Concrete Steps
This project outlines the steps to resurface worn concrete steps, including cleaning, repairing cracks, applying a bonding agent, and finishing with a concrete resurfacer product.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

