powered by
Clip 1/3
Helpful?

Step 4 · Mix and Apply Concrete Resurfacer

In a clean mixing bucket, combine the concrete resurfacer powder with the recommended amount of clean water. Mix thoroughly with a drill equipped with a mixing paddle until a lump-free, workable consistency is achieved. The mixture should be like thick pancake batter. Immediately after mixing, pour the resurfacer onto the primed step and spread it evenly using a squeegee or trowel. Work from the top step downwards. Ensure consistent thickness across all surfaces.

Tools and Materials

Bucket DEWALT 9 Amp 1/2 in. Spade Handle Drill Concrete Mud Mixer Unger Lock-On 22 in. Foam Floor Squeegee 975350 DEWALT 12 in. x 4 in. Carbon Steel Finishing Trowel Quikrete 40 lbs. Re-Cap Concrete Resurfacer 113147 Classic Stone 10 cu. ft. Decomposed Granite Brown blend Decorative Stone - (1 Bag/10 cu. ft./Pallet) HD.COM SS 1 Water
Mix and Apply Concrete Resurfacer · How to Resurface Worn Concrete Steps · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.