Apply Textured Finish
From How to Resurface Worn Concrete Steps · Step 5 of 6 · Video by Today's Homeowner with Danny Lipford

Showing 1:16–1:25 of the source video. Watch the full video with every moment.
What happens in this clip
If a non-slip surface is desired for added safety and aesthetic appeal, wait a few minutes after applying the main resurfacer layer for it to begin setting up slightly. The ideal time is when the surface has lost its wet sheen but is still workable. Then, gently drag a fine-bristle broom across the surface in a consistent direction. This action will create a textured finish that provides better traction and a decorative, broom-finished concrete look. Once the desired texture is achieved, allow the resurfacer to fully cure according to the product's instructions before walking or driving on it. This curing process is critical for durability.
Goal: Create a non-slip, textured surface on the newly resurfaced concrete.
What's used
Tools
- Fine-Bristle Broom
- Stiff utility brush
- Specialized concrete broom
About the full video
This project provides a guide on how to rejuvenate existing concrete patios, walkways, and driveways that show signs of damage like cracks, pits, or general wear. By using a concrete resurfacer, you can achieve the look of freshly poured concrete without the extensive labor and cost of replacement. The process involves thorough cleaning, repairing minor surface imperfections, applying a new layer of resurfacer, and optionally creating a non-slip textured finish.
Step 5 of 6: Texture and Finish
While the resurfacer is still wet, use a broom, stiff brush, or specialized texturing tools to create the desired finish. A broom can create subtle lines, while a trowel can be used for smoother finishes or to create patterns. Work from the top step down. Smooth any ridges or uneven areas with a trowel as needed. Ensure all edges are neat and tidy.
Every video in How to Resurface Worn Concrete Steps
Step 1: Inspect and Clean Concrete Steps
- 0:35–0:58 Clean and Prepare Damaged Steps
- 0:13–0:35 Clean Concrete Stairs
- 1:19–2:05 Cleaning the Concrete Surface
Step 2: Repair Cracks and Damage
- 1:07–1:26 Fill Concrete Cracks
- 2:52–3:20 Apply and Level Patching Compound
- 0:00–0:10 Apply Crack Filler
Step 3: Prime the Surface
- 4:24–5:41 Prime the Concrete Surface
- 0:04–0:09 Prepare and Prime the Concrete Surface
- 4:17–5:40 Apply Concrete Bonding Adhesive
Step 4: Mix and Apply Concrete Resurfacer
- 0:13–0:21 Mix Concrete Resurfacing Product
- 2:22–3:19 Apply and Texture Concrete Resurfacer
- 0:21–0:39 Apply Thin Layer of Resurfacer
Step 5: Texture and Finish
- 16:32–16:40 Achieve Desired Finish
- 0:40–0:45 Apply Broom Finish (Optional)
- 1:16–1:25 Apply Textured Finish (this video)
Step 6: Cure the Resurfacer
- 0:33–0:40 Cure Resurfaced Concrete
- 0:12–0:15 Cure and Inspect
- 0:54–1:02 Cure Resurfaced Steps
How to Resurface Worn Concrete Steps
This project outlines the steps to resurface worn concrete steps, including cleaning, repairing cracks, applying a bonding agent, and finishing with a concrete resurfacer product.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

