Achieve Desired Finish
From How to Resurface Worn Concrete Steps · Step 5 of 6 · Video by Today's Homeowner with Danny Lipford

Showing 16:32–16:40 of the source video. Watch the full video with every moment.
What happens in this clip
Once the resurfacing compound is applied and has begun to firm up but is still wet enough to be textured, you can create a broom finish. Lightly drag a stiff-bristled broom across the surface in a consistent direction. This will create fine lines that enhance the patio's appearance and provide a slip-resistant texture, making it safer to walk on, especially when wet. After applying the texture, allow the concrete to cure fully according to the manufacturer's instructions before resuming normal use.
Goal: Enhance safety and appearance of the resurfaced patio.
What's used
Tools
- Stiff-Bristled Broom
About the full video
This project outlines the process of repairing and resurfacing a concrete patio that suffers from improper sloping, cracking, and surface deterioration. It involves identifying problem areas, preparing the existing concrete by removing loose material, and then applying a specialized resurfacing compound to create a new, uniform surface with correct drainage away from the house.
Step 5 of 6: Texture and Finish
While the resurfacer is still wet, use a broom, stiff brush, or specialized texturing tools to create the desired finish. A broom can create subtle lines, while a trowel can be used for smoother finishes or to create patterns. Work from the top step down. Smooth any ridges or uneven areas with a trowel as needed. Ensure all edges are neat and tidy.
Every video in How to Resurface Worn Concrete Steps
Step 1: Inspect and Clean Concrete Steps
- 0:35–0:58 Clean and Prepare Damaged Steps
- 0:13–0:35 Clean Concrete Stairs
- 1:19–2:05 Cleaning the Concrete Surface
Step 2: Repair Cracks and Damage
- 1:07–1:26 Fill Concrete Cracks
- 2:52–3:20 Apply and Level Patching Compound
- 0:00–0:10 Apply Crack Filler
Step 3: Prime the Surface
- 4:24–5:41 Prime the Concrete Surface
- 0:04–0:09 Prepare and Prime the Concrete Surface
- 4:17–5:40 Apply Concrete Bonding Adhesive
Step 4: Mix and Apply Concrete Resurfacer
- 0:13–0:21 Mix Concrete Resurfacing Product
- 2:22–3:19 Apply and Texture Concrete Resurfacer
- 0:21–0:39 Apply Thin Layer of Resurfacer
Step 5: Texture and Finish
- 16:32–16:40 Achieve Desired Finish (this video)
- 0:40–0:45 Apply Broom Finish (Optional)
- 1:16–1:25 Apply Textured Finish
Step 6: Cure the Resurfacer
- 0:33–0:40 Cure Resurfaced Concrete
- 0:12–0:15 Cure and Inspect
- 0:54–1:02 Cure Resurfaced Steps
How to Resurface Worn Concrete Steps
This project outlines the steps to resurface worn concrete steps, including cleaning, repairing cracks, applying a bonding agent, and finishing with a concrete resurfacer product.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

