powered by

Apply Concrete Bonding Adhesive

From How to Resurface Worn Concrete Steps · Step 3 of 6 · Video by Modern Builds

Showing 4:17–5:40 of the source video. Watch the full video with every moment.

What happens in this clip

Although not strictly required for some resurfacing products, applying a concrete bonding adhesive (like Quikrete Concrete Bonding Adhesive) is recommended for optimal results. Pour the bonding adhesive into a paint tray and dilute it with water (e.g., one part adhesive to two parts water, or a slightly more concentrated mix). Use a roller to apply an even coat over the entire prepped concrete surface. Allow the adhesive to dry completely before proceeding to the resurfacing step.

Goal: Enhance adhesion between the old concrete and the new resurfacing layer.

What's used

Tools

  • Paint Roller
  • Paint Tray

Materials

  • Quikrete Concrete Bonding Adhesive Quikrete
  • Acrylic polymer additive
  • Water

About the full video

This DIY project details the transformation of an old, severely damaged concrete sidewalk into a new, smooth surface using concrete patching and resurfacing techniques. It covers thorough cleaning, filling deep voids, preparing edges, applying a bonding agent, and finishing with multiple layers of concrete resurfacer.

What's said in this clip

directions on my concrete top coat do not require a bonding primer like this but I want to get the best results possible so I'll use a roller to apply a coat of this and the directions say to dilute this onep part bonding adhesive to two parts water but I went with a little bit more of a concentrated mix and once this dries it'll finally be time to do our concrete recap after a word from today's sponsor Squarespace if you need a website online store or just a custom domain Squarespace is your One-Stop shop and you need zero website building experience and now with fluid engine it's never been easier to unlock your unbreakable creativity this their next Generation website design platform with enhanced drag and drop editing technology on both desktop and mobile there's also no limits to the number of products that you can have on a Squarespace site whether that's a physical good a digital good or a service product and if you take payments in person Squarespace has got you covered by connecting the Square card reader to the Squarespace app all of your sales orders and inventory are up to date online and in person so to learn more and to build your own Squarespace site before entering any of your credit card info make sure and follow my link down in the description that squarespace.com sodern builds and don't forget to use my code modern builds for 10% off your first site store or domain when it's time to go live as always thanks to you guys for watching Big thanks to squares space for supporting now let's finish up this

Automatically transcribed from the source video.

Step 3 of 6: Prime the Surface

Once the repairs are fully cured and the surface is dry, apply a concrete bonding agent or primer according to the manufacturer's instructions. This is typically brushed or rolled onto the concrete. Ensure complete coverage, paying attention to edges and corners. This step is crucial for creating a strong bond between the old concrete and the new resurfacing material.

Open this step in the guide

Every video in How to Resurface Worn Concrete Steps

  1. Step 1: Inspect and Clean Concrete Steps

  2. Step 2: Repair Cracks and Damage

  3. Step 3: Prime the Surface

  4. Step 4: Mix and Apply Concrete Resurfacer

  5. Step 5: Texture and Finish

  6. Step 6: Cure the Resurfacer

Questions about How to Resurface Worn Concrete Steps

Is this project truly beginner-friendly, and can it realistically be completed in two days?

While rated for beginners, successful resurfacing heavily relies on meticulous surface preparation, which can be time-consuming. The two-day estimate covers active work time, but the resurfacer will require additional undisturbed curing time, often 24-48 hours or more, before light use. Plan for continuous dry weather.

What are the most important safety precautions to take when working with concrete resurfacers and chiseling old concrete?

Always wear personal protective equipment, including safety glasses, a dust mask to avoid inhaling cement dust, and gloves to protect skin from chemical burns and abrasions. When chiseling, wear sturdy boots and be aware of flying debris. Ensure good ventilation if working in an enclosed area.

Do I really need a pressure washer for cleaning, or will a scrub brush and hose suffice?

A pressure washer is highly recommended for optimal results, as it thoroughly removes embedded dirt, loose concrete, and efflorescence, which is critical for strong adhesion of the resurfacer. While a scrub brush and hose can work for very light cleaning, a pressure washer ensures the best possible clean for long-lasting repair.

What is the biggest mistake beginners make when applying concrete resurfacer, and how can it be avoided?

The most common mistake is inadequate surface preparation, including insufficient cleaning or failing to properly repair cracks and prime the surface. This leads to poor adhesion, resulting in the resurfacer peeling or flaking prematurely. Take extra time to ensure the steps are perfectly clean, stable, and primed before mixing and applying the resurfacer.

How crucial is proper curing for the resurfacer, and what is the best way to do it?

Proper curing is essential for the resurfacer to achieve its maximum strength, durability, and resistance to cracking. After application, cover the resurfaced steps with plastic sheeting, like the Aluf Plastics sheeting, for at least 24-48 hours to retain moisture. This slow drying process prevents shrinkage cracks and ensures a hard, long-lasting surface.

What are the ideal weather conditions for applying concrete resurfacer, and why are they important?

Apply resurfacer when temperatures are consistently between 50°F and 85°F (10°C and 30°C), with no rain expected for at least 24-48 hours after application. Extreme heat can cause the product to dry too quickly, leading to cracks, while cold temperatures can inhibit proper curing. Avoid direct sunlight during application if possible.

Can I use regular concrete mix or just paint my steps instead of a specialized concrete resurfacer?

Regular concrete mix is not designed for thin overlays and won't bond effectively or be durable enough for resurfacing worn steps. While painting is an option, it typically offers less protection and can peel faster than a properly applied concrete resurfacer. Resurfacer is formulated specifically for thin applications and strong adhesion to existing concrete.

How to Resurface Worn Concrete Steps

This project outlines the steps to resurface worn concrete steps, including cleaning, repairing cracks, applying a bonding agent, and finishing with a concrete resurfacer product.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Apply Concrete Bonding Adhesive — How to Resurface Worn Concrete Steps | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.