Apply and Level Patching Compound
From How to Resurface Worn Concrete Steps · Step 2 of 6 · Video by Mike Haduck Masonry

Showing 2:52–3:20 of the source video. Watch the full video with every moment.
What happens in this clip
Carefully transfer the mixed patching compound into the spalled areas and cracks. Use a trowel to spread and compact the material, ensuring it fills all voids and is pressed firmly against the existing concrete. Level the new compound with the surrounding concrete surface, smoothing it out to match the contour as much as possible.
Goal: Apply the mixed patching compound into the prepared areas and level it with a trowel.
What's used
Tools
- Trowel
Materials
- Rapid-Set Mortar Mix
About the full video
This video demonstrates a detailed process for repairing spalled and cracked concrete sidewalks using rapid-set patching compound, incorporating techniques for proper surface preparation, expansion joint creation, and color blending for a smooth and durable finish.
Step 2 of 6: Repair Cracks and Damage
For cracks less than 1/4 inch wide, use a flexible concrete crack filler. For wider cracks, holes, or spalled areas, use a concrete patching compound. Follow the manufacturer's instructions for mixing and application. For patching compounds, ensure you overfill slightly to allow for shrinkage. Smooth the patch flush with the surrounding concrete surface using a trowel.
Every video in How to Resurface Worn Concrete Steps
Step 1: Inspect and Clean Concrete Steps
- 0:35–0:58 Clean and Prepare Damaged Steps
- 0:13–0:35 Clean Concrete Stairs
- 1:19–2:05 Cleaning the Concrete Surface
Step 2: Repair Cracks and Damage
- 1:07–1:26 Fill Concrete Cracks
- 2:52–3:20 Apply and Level Patching Compound (this video)
- 0:00–0:10 Apply Crack Filler
Step 3: Prime the Surface
- 4:24–5:41 Prime the Concrete Surface
- 0:04–0:09 Prepare and Prime the Concrete Surface
- 4:17–5:40 Apply Concrete Bonding Adhesive
Step 4: Mix and Apply Concrete Resurfacer
- 0:13–0:21 Mix Concrete Resurfacing Product
- 2:22–3:19 Apply and Texture Concrete Resurfacer
- 0:21–0:39 Apply Thin Layer of Resurfacer
Step 5: Texture and Finish
- 16:32–16:40 Achieve Desired Finish
- 0:40–0:45 Apply Broom Finish (Optional)
- 1:16–1:25 Apply Textured Finish
Step 6: Cure the Resurfacer
- 0:33–0:40 Cure Resurfaced Concrete
- 0:12–0:15 Cure and Inspect
- 0:54–1:02 Cure Resurfaced Steps
How to Resurface Worn Concrete Steps
This project outlines the steps to resurface worn concrete steps, including cleaning, repairing cracks, applying a bonding agent, and finishing with a concrete resurfacer product.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

