Apply Crack Filler
From How to Resurface Worn Concrete Steps · Step 2 of 6 · Video by Family Handyman

Showing 0:00–0:10 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by cleaning any loose debris or dirt from within and around the concrete cracks. Once clean, apply a flexible crack filler or sealant directly into the crack. Use a small trowel or putty knife to press the sealant deep into the crack, ensuring it fills any voids. Smooth the sealant along the crack line with the trowel, then use a small paintbrush to further spread and feather the edges, creating a neat and even application along the entire length of the crack.
Goal: Fill and seal concrete cracks
What's used
Tools
- Paintbrush
- Small block brush
- Protective Gloves
- Latex gloves
- Small Trowel
- Spackle knife
Materials
- Crack Filler
- Asphalt emulsion crack filler
About the full video
This project demonstrates a simple DIY method to cover up unsightly cracks in concrete surfaces, such as driveways or patios. It involves applying a crack filler, covering it with decorative aggregate, and then pressing the aggregate into the sealant for a durable and aesthetically pleasing finish.
Step 2 of 6: Repair Cracks and Damage
For cracks less than 1/4 inch wide, use a flexible concrete crack filler. For wider cracks, holes, or spalled areas, use a concrete patching compound. Follow the manufacturer's instructions for mixing and application. For patching compounds, ensure you overfill slightly to allow for shrinkage. Smooth the patch flush with the surrounding concrete surface using a trowel.
Every video in How to Resurface Worn Concrete Steps
Step 1: Inspect and Clean Concrete Steps
- 0:35–0:58 Clean and Prepare Damaged Steps
- 0:13–0:35 Clean Concrete Stairs
- 1:19–2:05 Cleaning the Concrete Surface
Step 2: Repair Cracks and Damage
- 1:07–1:26 Fill Concrete Cracks
- 2:52–3:20 Apply and Level Patching Compound
- 0:00–0:10 Apply Crack Filler (this video)
Step 3: Prime the Surface
- 4:24–5:41 Prime the Concrete Surface
- 0:04–0:09 Prepare and Prime the Concrete Surface
- 4:17–5:40 Apply Concrete Bonding Adhesive
Step 4: Mix and Apply Concrete Resurfacer
- 0:13–0:21 Mix Concrete Resurfacing Product
- 2:22–3:19 Apply and Texture Concrete Resurfacer
- 0:21–0:39 Apply Thin Layer of Resurfacer
Step 5: Texture and Finish
- 16:32–16:40 Achieve Desired Finish
- 0:40–0:45 Apply Broom Finish (Optional)
- 1:16–1:25 Apply Textured Finish
Step 6: Cure the Resurfacer
- 0:33–0:40 Cure Resurfaced Concrete
- 0:12–0:15 Cure and Inspect
- 0:54–1:02 Cure Resurfaced Steps
How to Resurface Worn Concrete Steps
This project outlines the steps to resurface worn concrete steps, including cleaning, repairing cracks, applying a bonding agent, and finishing with a concrete resurfacer product.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

