powered by

Final Mounting and Securing the Handrail

From How to Install a Handrail on Outdoor Concrete Steps · Step 4 of 7 · Video by Fortin Ironworks

Showing 1:16–1:33 of the source video. Watch the full video with every moment.

What happens in this clip

Set the handrail into its final mounting position on the steps, ensuring the trimmed post sits flush. Drill a hole through one of the post mount's pre-drilled holes, extending into your steps. Use a drill bit appropriate for your step material (e.g., masonry bit for concrete). Insert an anchor suitable for your steps (e.g., tapcon screw or sleeve anchor for concrete) into the drilled hole and tighten it. Drill one hole and install one anchor at a time for each post. To help plumb the rail posts side to side, use the stainless steel washers provided to shim underneath the mounting plates as needed. Once the posts are plumb and the rail is level and secure, tighten all anchors to your steps.

Goal: Securely fasten the handrail to the steps, ensuring it is plumb and stable.

What's used

Tools

  • Anchor Fasteners
  • tapcon screws
  • sleeve anchors
  • wedge anchors).
  • Drill Bit
  • Drill
  • Level
  • Safety Glasses
  • Stainless Steel Washers
  • Plastic shims
  • Wrench/Driver
  • Socket set

About the full video

This project provides detailed instructions on how to install a handrail on concrete steps, focusing on ensuring the rail is perfectly plumb (vertical) and securely fastened. It covers initial fitting, measuring and cutting posts for a custom fit, assembling mounting hardware, and finally drilling and anchoring the rail to the steps while shimming for side-to-side plumbness.

Step 4 of 7: Attach Handrail Posts to Anchors

Position the handrail post over the installed anchor. Align the mounting holes in the post base with the anchors. Insert the appropriate bolts or screws through the post base and into the anchors. Use washers as needed. Tighten all fasteners securely using a wrench or socket set. Ensure the posts are plumb and aligned with each other and the staircase. Check for any wobble or looseness; tighten further if necessary.

Open this step in the guide

Every video in How to Install a Handrail on Outdoor Concrete Steps

  1. Step 1: Determine Handrail Placement and Height

  2. Step 2: Drill Pilot Holes for Post Anchors

  3. Step 3: Install Concrete Anchors

  4. Step 4: Attach Handrail Posts to Anchors

  5. Step 5: Measure and Cut Handrail Section

  6. Step 6: Attach Handrail to Posts

  7. Step 7: Install End Caps or Returns (if applicable)

How to Install a Handrail on Outdoor Concrete Steps

Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Final Mounting and Securing the Handrail — How to Install a Handrail on Outdoor Concrete Steps | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.