Finish with End Caps and Sticker Removal
From How to Install a Handrail on Outdoor Concrete Steps · Step 7 of 7 · Video by BYOT

Showing 7:35–7:53 of the source video. Watch the full video with every moment.
What happens in this clip
Remove any remaining product stickers from the handrail using a sticker remover like 'Goof Off'. Then, install plastic end caps onto both ends of the handrail to provide a finished look and protect against sharp edges. Similarly, secure the matching end caps to the bottom of each railing post, tapping them gently into place with a rubber mallet if needed. These caps enhance aesthetics and protect the posts.
Goal: Complete the aesthetic and protective finishing touches on the railing system.
What's used
Tools
- Cloth
- Goof Off Goof Off
- Mineral spirits
- Handrail End Caps Viewrail
- Post End Caps Viewrail
- Rubber Mallet
About the full video
This project provides a comprehensive guide on installing a custom rod railing system, specifically focusing on its application for stairs using angled brackets, along with the installation of a matching gate. The process involves precise measurement and marking, pre-drilling holes, securing specialized angled brackets and posts to the stair stringers and deck, installing the top rail, cutting and crimping stainless steel rods, and finally, installing a spring-loaded gate with a magnetized latch system.
What's said in this clip
locations the angle from post to post posts was absolutely perfect the only other thing that needs to be done for a step railing is to remove any of the stickers that are shown which can be easily removed with some goof off and secure our end caps on both ends of our handrail as well as the bottom of each post
Automatically transcribed from the source video.
Step 7 of 7: Install End Caps or Returns (if applicable)
If your design includes end caps or returns for the handrail, install them now. Clean the ends of the handrail and the inside of the cap or return. Apply adhesive if recommended by the manufacturer, or use small screws for a mechanical fastening. Ensure the cap or return fits snugly and is aligned with the handrail. Wipe away any excess adhesive immediately.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal (this video)
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

