Install Handrail Posts
From How to Install a Handrail on Outdoor Concrete Steps · Step 4 of 7 · Video by Handsome Or Handy

Showing 0:45–0:51 of the source video. Watch the full video with every moment.
What happens in this clip
Once the concrete steps are firmly in place, slide the wooden handrail posts into the pre-installed fasteners (base plates). Secure the posts to these base plates using appropriate screws or bolts. Ensure the posts are plumb and securely fastened to provide a stable foundation for the handrails.
Goal: Wooden handrail posts are attached to the previously installed fasteners on the concrete steps, providing the structural base for the railing system.
What's used
Tools
- Cordless Drill/Driver
- Level
- Screws/Bolts
- Wooden Handrail Posts
About the full video
This video demonstrates the process of replacing old, failing concrete steps with new pre-fabricated concrete steps and subsequently installing handrail posts. While the provided context specifies 'Staircase Structural Repair using Reinforcement Plates,' this video does not feature the structural repair of existing stair stringers with reinforcement plates. Instead, it details the replacement of entire concrete step units and the installation of anchors for new handrails.
What's said in this clip
have to deal with this again once we got them bolted on from underneath we're going to set the step in place lift it with these chains Donald's just going to direct you where exactly it needs to go and then the final finesse of getting it perfectly placed I'm going to leave Donald to build the railings so I'm done with this projecting on to the next one
Automatically transcribed from the source video.
Step 4 of 7: Attach Handrail Posts to Anchors
Position the handrail post over the installed anchor. Align the mounting holes in the post base with the anchors. Insert the appropriate bolts or screws through the post base and into the anchors. Use washers as needed. Tighten all fasteners securely using a wrench or socket set. Ensure the posts are plumb and aligned with each other and the staircase. Check for any wobble or looseness; tighten further if necessary.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts (this video)
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

