Position Anchor and Insert Wedge Anchor Bolt
From How to Install a Handrail on Outdoor Concrete Steps · Step 3 of 7 · Video by CreativeProcessDIY

Showing 0:13–0:18 of the source video. Watch the full video with every moment.
What happens in this clip
Place the metal post anchor back over the clean, drilled hole, aligning the central hole with the concrete opening. Then, take a wedge anchor bolt, which should already have a washer and nut loosely threaded onto it, and insert it through the central hole of the post anchor and down into the drilled concrete hole.
Goal: Place the anchor and prepare to secure it with the bolt
What's used
Tools
- Metal Post Anchor SIMPSON Strong-Tie ABU44Z
- Nut
- Washer
- Wedge Anchor Bolt
About the full video
This DIY project guides you through the process of securely installing a metal post anchor into a concrete surface. It involves drilling a precise hole using a hammer drill, clearing debris, inserting a wedge anchor bolt through the post anchor, and then setting and tightening the anchor to create a stable base for a wooden post.
Step 3 of 7: Install Concrete Anchors
Insert the concrete anchors into the pilot holes. For wedge anchors, thread the nut onto the bolt a few turns, then tap the anchor into the hole with a hammer until the flange is flush with the concrete surface. For sleeve anchors, insert the anchor until the collar is flush. Tighten the nut to expand the anchor within the concrete. For lag shields, insert the shield and then drive the lag screw into it. Ensure each anchor is firmly seated and ready to support the post.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt (this video)
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

