powered by

Install Handrail and Brackets

From How to Install a Handrail on Outdoor Concrete Steps · Step 6 of 7 · Video by #DADLIFE DIY (Do It Yourself like a Pro !)

Showing 7:17–9:36 of the source video. Watch the full video with every moment.

What happens in this clip

Begin the installation by loosely attaching the handrail brackets to the handrail with screws, ensuring they can still rotate slightly. Mount the top-most bracket first by screwing it into a detected wall stud, but do not fully tighten it. This initial top bracket will help support the handrail. Double-check the height of the handrail at the bottom of the stairs to ensure it aligns with your pre-marked tape guides (e.g., 35 inches from the step nosing). Then, install the middle and bottom brackets, screwing them into the wall studs. The loose fit of the brackets to the handrail allows for minor adjustments in angle and position. Once all brackets are securely screwed into the studs and the handrail is correctly positioned and level with the height markings, fully tighten all the screws connecting the handrail to the brackets and the brackets to the wall. This ensures a solid and stable handrail.

Goal: Securely mount the handrail to the wall at the correct height and spacing.

What's used

Tools

  • Finished Handrail Lowe's (Model #6010P)
  • Handrail Brackets Gate-House (Model #0308874)
  • Screwdriver or Drill
  • Screws

About the full video

This project provides a comprehensive guide on installing a wooden handrail on a staircase. It covers understanding building codes for height and clearance, selecting and pre-finishing the handrail and brackets, and the step-by-step process of securely mounting the handrail to the wall, ensuring it meets safety standards.

Step 6 of 7: Attach Handrail to Posts

Position the cut handrail section onto the top of the posts. Use a level to ensure the handrail is perfectly horizontal or follows the angle of the stairs correctly. Mark the attachment points on the underside of the handrail and the top of the posts. Pre-drill pilot holes if necessary, especially for wood. Secure the handrail to the posts using appropriate screws or brackets, ensuring a strong and stable connection. If using brackets, follow their specific installation instructions.

Open this step in the guide

Every video in How to Install a Handrail on Outdoor Concrete Steps

  1. Step 1: Determine Handrail Placement and Height

  2. Step 2: Drill Pilot Holes for Post Anchors

  3. Step 3: Install Concrete Anchors

  4. Step 4: Attach Handrail Posts to Anchors

  5. Step 5: Measure and Cut Handrail Section

  6. Step 6: Attach Handrail to Posts

  7. Step 7: Install End Caps or Returns (if applicable)

How to Install a Handrail on Outdoor Concrete Steps

Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install Handrail and Brackets — How to Install a Handrail on Outdoor Concrete Steps | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.