Measure and Cut Handrail
From How to Install a Handrail on Outdoor Concrete Steps · Step 5 of 7 · Video by The Fixer 2

Showing 0:00–0:43 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by measuring the length of the existing top railing of your deck stairs where the new handrail will be installed. The video demonstrates measuring approximately 90 inches along the top edge of the existing railing. Once the length is determined, use a miter saw to make a clean, square cut on one end of the round wooden handrail. Then, measure the full required length (e.g., 90 inches) from that cut end, mark it with a pencil, and make the final cut to size with the miter saw. Ensure both ends are cut cleanly.
Goal: Measure the required length for the wooden handrail along the existing deck railing, then cut the handrail to this precise length using a miter saw.
What's used
Tools
- Measuring Tape
- Miter Saw
- Pencil
Materials
- Round Wooden Handrail
About the full video
This video provides a step-by-step guide on how to install a wooden handrail on a deck staircase using metal brackets. The process involves precise measuring and cutting of the handrail, marking and drilling pilot holes, and securely fastening the handrail to the staircase newel posts and stringer with four strategically placed metal brackets.
Step 5 of 7: Measure and Cut Handrail Section
Measure the exact distance between the centers of the two handrail posts. If using a continuous handrail, measure from the outer edge of one post to the outer edge of the other. Transfer this measurement to your handrail material. Use a miter saw or hacksaw suitable for your material (e.g., wood, metal, PVC) to make a clean, straight cut. If your design includes end caps or returns, account for their length in your measurement. Smooth any rough edges with sandpaper or a file.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail (this video)
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

