Drill Anchor Hole in Concrete
From How to Install a Handrail on Outdoor Concrete Steps · Step 2 of 7 · Video by Andrew Thron Improvements

Showing 0:00–0:02 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by marking the precise location for your post on the concrete surface. This can be done using a chalk line or marker. Then, using a rotary hammer drill equipped with a masonry drill bit of the appropriate diameter (matching your anchor bolt, typically 5/8 inch), drill a hole into the concrete. Ensure the hole is deep enough to fully accommodate the anchor bolt as specified by the manufacturer. The video shows blue chalk lines indicating the post's intended footprint.
Goal: Create a pilot hole for the anchor bolt in the concrete.
What's used
Tools
- Hearing Protection
- Masonry Drill Bit
- Rotary Hammer Drill RIDGID OCTANE
- Impact drill with hammer function (for smaller holes)
- Safety Glasses
Materials
- Chalk Line
- Construction crayon
- Concrete Surface
About the full video
This DIY project demonstrates how to securely anchor a wooden post to a concrete surface using a metal post base, an anchor bolt, and a rotary hammer drill. This method provides a sturdy vertical support for various outdoor structures, such as decks, fences, or pergolas.
Step 2 of 7: Drill Pilot Holes for Post Anchors
Select a hammer drill with a masonry bit that matches the diameter and depth recommended for your chosen post anchors. Place the drill bit precisely on your marks. Drill pilot holes into the concrete to the required depth. Ensure the drill is held perpendicular to the surface for a straight hole. Clean out any dust from the holes using a brush or vacuum.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete (this video)
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

