Secure Post Bracket
From How to Install a Handrail on Outdoor Concrete Steps · Step 4 of 7 · Video by Today's Homeowner with Danny Lipford

Showing 0:42–0:52 of the source video. Watch the full video with every moment.
What happens in this clip
Align the post bracket over the installed lead anchors. Insert the appropriate screws or bolts through the holes in the bracket and thread them into the lead anchors. Use a socket wrench to tighten these screws. As they are tightened, the lead anchors expand, gripping the concrete securely and creating a robust attachment point for the handrail post.
Goal: Firmly attach the post bracket to the concrete.
What's used
Tools
- Post Bracket
- Screws/Bolts
- Tapcon screws (if no lead anchors)
- Socket Wrench
- Impact driver with socket adapter
About the full video
This video demonstrates a simple and secure method for mounting a handrail post onto a concrete surface, such as steps or a patio. Instead of burying the post in the ground, which isn't feasible with concrete, the project utilizes a specialized post bracket and lead anchors to create a strong, durable attachment point. The process involves marking, drilling, inserting anchors, and securing the bracket, allowing for a stable handrail installation.
Step 4 of 7: Attach Handrail Posts to Anchors
Position the handrail post over the installed anchor. Align the mounting holes in the post base with the anchors. Insert the appropriate bolts or screws through the post base and into the anchors. Use washers as needed. Tighten all fasteners securely using a wrench or socket set. Ensure the posts are plumb and aligned with each other and the staircase. Check for any wobble or looseness; tighten further if necessary.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket (this video)
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

