Attach Mitered Returns
From How to Install a Handrail on Outdoor Concrete Steps · Step 7 of 7 · Video by This Old House

Showing 3:21–3:35 of the source video. Watch the full video with every moment.
What happens in this clip
Take the small cut-off pieces from each end of the handrail. These will serve as the 'returns.' Apply a small amount of wood glue to the mitered face of one return piece and align it with the corresponding mitered end of the handrail. Drill two small pilot holes through the return and into the handrail. Secure the return by driving two finish nails into the pilot holes, ensuring a strong, clean joint. Repeat for the other end of the handrail.
Goal: Glue and nail the cut-off pieces (returns) to the mitered ends of the handrail for a finished appearance.
What's used
Tools
- Cordless Drill
- Drill Bit
- Hammer
- Nail Gun
Materials
- Finish Nails
- Wood Glue
About the full video
This video provides a detailed guide on installing a wooden handrail along a staircase, adhering to building code height requirements. It covers essential steps from accurately marking the wall for bracket placement and cutting the railing to size, to attaching mitered returns and finally mounting the railing securely to the wall.
Step 7 of 7: Install End Caps or Returns (if applicable)
If your design includes end caps or returns for the handrail, install them now. Clean the ends of the handrail and the inside of the cap or return. Apply adhesive if recommended by the manufacturer, or use small screws for a mechanical fastening. Ensure the cap or return fits snugly and is aligned with the handrail. Wipe away any excess adhesive immediately.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns (this video)
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

