Drill Holes for Anchors
From How to Install a Handrail on Outdoor Concrete Steps · Step 2 of 7 · Video by Today's Homeowner with Danny Lipford

Showing 0:31–0:38 of the source video. Watch the full video with every moment.
What happens in this clip
Using a hammer drill fitted with a masonry bit, carefully drill into the concrete at each marked location. The depth of the holes should be sufficient to fully accommodate the lead anchors that will be inserted. Ensure the drill is held firmly and drills straight down to create clean, precise holes.
Goal: Create appropriately sized holes in the concrete for the lead anchors.
What's used
Tools
- Hammer Drill DeWalt
- Heavy-duty corded drill with hammer function
- Hearing Protection
- Earmuffs
- Masonry Drill Bit
- Safety Glasses
About the full video
This video demonstrates a simple and secure method for mounting a handrail post onto a concrete surface, such as steps or a patio. Instead of burying the post in the ground, which isn't feasible with concrete, the project utilizes a specialized post bracket and lead anchors to create a strong, durable attachment point. The process involves marking, drilling, inserting anchors, and securing the bracket, allowing for a stable handrail installation.
Step 2 of 7: Drill Pilot Holes for Post Anchors
Select a hammer drill with a masonry bit that matches the diameter and depth recommended for your chosen post anchors. Place the drill bit precisely on your marks. Drill pilot holes into the concrete to the required depth. Ensure the drill is held perpendicular to the surface for a straight hole. Clean out any dust from the holes using a brush or vacuum.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors (this video)
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

