Understand Building Codes and Mark Handrail Height
From How to Install a Handrail on Outdoor Concrete Steps · Step 1 of 7 · Video by #DADLIFE DIY (Do It Yourself like a Pro !)

Showing 1:11–2:36 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by understanding the necessity of a handrail based on local building codes. The video mentions that stairways with a rise of more than 30 or 36 inches typically require a handrail. Identify a suitable, flat wall section for installation; avoid walls with complex or stepped profiles. Research and confirm the required handrail height according to your local building codes. The video references the 2018 IRC Section 311.7 R311.7.8.1 Height, which specifies handrail height between 34 and 38 inches (864-965 mm) above the front edge of the step, measured vertically from the sloped plane adjoining the tread nosing. Mark this required height (e.g., 35 inches as chosen in the video) above the nose of each step using blue painter's tape and a ruler or tape measure.
Goal: Determine compliant handrail height and mark its position on the wall.
What's used
Tools
- Blue Painter's Tape
- Masking tape
- Ruler or Tape Measure
About the full video
This project provides a comprehensive guide on installing a wooden handrail on a staircase. It covers understanding building codes for height and clearance, selecting and pre-finishing the handrail and brackets, and the step-by-step process of securely mounting the handrail to the wall, ensuring it meets safety standards.
Step 1 of 7: Determine Handrail Placement and Height
Before drilling, determine the optimal placement for your handrail posts. Measure from the edge of the top step to establish the desired height, typically between 34 and 38 inches from the walking surface. Mark the locations for each post, ensuring they are positioned to provide a continuous handhold along the length of the stairs. Consider the angle of the stairs and the intended user to ensure the most ergonomic and accessible placement. Consult local building codes for specific requirements regarding handrail height, extension, and clearance.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
- 1:30–2:18 Determine and Mark Handrail Height
- 1:11–2:36 Understand Building Codes and Mark Handrail Height (this video)
- 0:04–0:30 Determine Railing Height and Mark Wall
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

