Determine Railing Height and Mark Wall
From How to Install a Handrail on Outdoor Concrete Steps · Step 1 of 7 · Video by This Old House

Showing 0:04–0:30 of the source video. Watch the full video with every moment.
What happens in this clip
Start by understanding that building codes typically require handrails to be installed between 32 and 34 inches from the nose of the stair tread. To accurately mark the installation height, place a level plumb against the wall and align it with the nose of a stair tread. Once level, mark the wall at the desired handrail height, in this case, 32 inches from the stair tread.
Goal: Measure and mark the required height for the handrail on the wall, ensuring it complies with building codes (typically 32-34 inches from the nose of the stair tread).
What's used
Tools
- Level
- Marker
- Tape Measure
About the full video
This video provides a detailed guide on installing a wooden handrail along a staircase, adhering to building code height requirements. It covers essential steps from accurately marking the wall for bracket placement and cutting the railing to size, to attaching mitered returns and finally mounting the railing securely to the wall.
Step 1 of 7: Determine Handrail Placement and Height
Before drilling, determine the optimal placement for your handrail posts. Measure from the edge of the top step to establish the desired height, typically between 34 and 38 inches from the walking surface. Mark the locations for each post, ensuring they are positioned to provide a continuous handhold along the length of the stairs. Consider the angle of the stairs and the intended user to ensure the most ergonomic and accessible placement. Consult local building codes for specific requirements regarding handrail height, extension, and clearance.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
- 1:30–2:18 Determine and Mark Handrail Height
- 1:11–2:36 Understand Building Codes and Mark Handrail Height
- 0:04–0:30 Determine Railing Height and Mark Wall (this video)
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

