Measure and Cut Rails
From How to Install a Handrail on Outdoor Concrete Steps · Step 5 of 7 · Video by Graeme Barnes

Showing 0:24–0:39 of the source video. Watch the full video with every moment.
What happens in this clip
Starting from the bottom of your staircase, use a measuring tape to determine the length of the first handrail section required. It's crucial to add an extra 150 millimeters (approximately 6 inches) to the measured length for both the first and last step sections of your staircase to ensure adequate overhang. Once measured, use a miter saw to accurately cut the aluminium handrail sections to their required lengths.
Goal: Cut handrail sections to the appropriate lengths, accounting for overhang at the top and bottom of the staircase.
What's used
Tools
- Hearing Protection
- Measuring Tape
- Miter Saw Bosch
- Circular saw with a non-ferrous blade
- Safety Glasses
Materials
- Promenaid Aluminium Handrail Promenaid
About the full video
This project provides step-by-step instructions for installing a Promenaid Aluminium Handrail System. It covers marking studs, cutting rails, connecting rail sections, fixing L-brackets and spacers to the wall, installing universal corners or bends, and finally, fitting the rubber vinyl inserts for a complete and secure handrail installation.
Step 5 of 7: Measure and Cut Handrail Section
Measure the exact distance between the centers of the two handrail posts. If using a continuous handrail, measure from the outer edge of one post to the outer edge of the other. Transfer this measurement to your handrail material. Use a miter saw or hacksaw suitable for your material (e.g., wood, metal, PVC) to make a clean, straight cut. If your design includes end caps or returns, account for their length in your measurement. Smooth any rough edges with sandpaper or a file.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails (this video)
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

