powered by

How To Install a DIY Handrail - Do It Yourself Handrail

Video by Fortin Ironworks · 1 moment used in Oak Valley Designs's DIY guides · 1:32 long

Moments in this video

  1. 1:16–1:33 Final Mounting and Securing the Handrail From How to Install a Handrail on Outdoor Concrete Steps, Step 4: Attach Handrail Posts to Anchors

    Set the handrail into its final mounting position on the steps, ensuring the trimmed post sits flush. Drill a hole through one of the post mount's pre-drilled holes, extending into your steps. Use a drill bit appropriate for your step material (e.g., masonry bit for concrete). Insert an anchor suitable for your steps (e.g., tapcon screw or sleeve anchor for concrete) into the drilled hole and tighten it. Drill one hole and install one anchor at a time for each post. To help plumb the rail posts side to side, use the stainless steel washers provided to shim underneath the mounting plates as needed. Once the posts are plumb and the rail is level and secure, tighten all anchors to your steps.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

How To Install a DIY Handrail - Do It Yourself Handrail — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.