Install Wedge Anchors
From How to Install a Handrail on Outdoor Concrete Steps · Step 3 of 7 · Video by Family DIY tv

Showing 3:24–4:36 of the source video. Watch the full video with every moment.
What happens in this clip
Insert the wedge anchors into the cleaned holes. The expansion mechanism should be on the bottom. Lightly tap each anchor with a hammer until it is mostly seated, leaving some threads exposed above the concrete surface. Ensure the anchors are straight and aligned, not tilted, to allow the post to sit flat. While the design allows for some wiggle room, aim for precise placement.
Goal: Properly seat the wedge anchors in the concrete, ready for post attachment.
What's used
Tools
- Hammer Unspecified
- Wedge Anchors Red Head TruBolt
About the full video
This project details the installation of a modular privacy wall system, specifically using HOFT posts and either wood or composite boards. It covers attaching mounting plates, anchoring posts into concrete, and finally installing the wooden boards, with tips on ensuring stability and aesthetics.
Step 3 of 7: Install Concrete Anchors
Insert the concrete anchors into the pilot holes. For wedge anchors, thread the nut onto the bolt a few turns, then tap the anchor into the hole with a hammer until the flange is flush with the concrete surface. For sleeve anchors, insert the anchor until the collar is flush. Tighten the nut to expand the anchor within the concrete. For lag shields, insert the shield and then drive the lag screw into it. Ensure each anchor is firmly seated and ready to support the post.
Every video in How to Install a Handrail on Outdoor Concrete Steps
Step 1: Determine Handrail Placement and Height
Step 2: Drill Pilot Holes for Post Anchors
- 0:31–0:38 Drill Holes for Anchors
- 0:00–0:02 Drill Anchor Hole in Concrete
- 0:29–1:13 Drill Anchor Holes
Step 3: Install Concrete Anchors
- 3:24–4:36 Install Wedge Anchors (this video)
- 0:13–0:18 Position Anchor and Insert Wedge Anchor Bolt
- 0:21 Install Concrete Anchors
Step 4: Attach Handrail Posts to Anchors
- 0:42–0:52 Secure Post Bracket
- 1:16–1:33 Final Mounting and Securing the Handrail
- 0:45–0:51 Install Handrail Posts
Step 5: Measure and Cut Handrail Section
- 0:24–0:39 Measure and Cut Rails
- 0:00–0:43 Measure and Cut Handrail
- 2:44–3:05 Cut and Fit Handrail
Step 6: Attach Handrail to Posts
- 2:11–2:39 Secure Handrail to End Brackets
- 7:17–9:36 Install Handrail and Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
Step 7: Install End Caps or Returns (if applicable)
- 12:04–13:20 Install Handrail Cap and Final Brackets
- 7:35–7:53 Finish with End Caps and Sticker Removal
- 3:21–3:35 Attach Mitered Returns
How to Install a Handrail on Outdoor Concrete Steps
Install a handrail on outdoor concrete steps to improve safety and accessibility. This involves selecting appropriate materials, securely mounting the handrail posts to the concrete, and attaching the handrail itself.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

