Cure the Concrete

What happens in this clip

Under normal weather conditions, allow the concrete to set for one day. To aid curing and prevent premature drying, keep the concrete moist for at least three days by occasionally spraying a fine mist of water on the surface. Additionally, cover the concrete with a plastic sheet or a piece of wet burlap to help retain moisture and promote proper curing.

Goal: Ensure proper curing of the concrete for maximum strength

What's used

Tools

• Spray Bottle

Materials

• Clean Water
• Plastic Sheet

About the full video

This video provides a step-by-step guide to constructing a concrete walkway using various Sakrete concrete mixes. It covers site preparation, building the formwork, laying a crushed stone base, mixing concrete, pouring, leveling, finishing, adding expansion joints, and curing the concrete.

Step 9 of 10: Cure the Concrete

Keep the concrete moist for at least 3 to 7 days after pouring. You can achieve this by covering it with plastic sheeting, burlap bags kept constantly wet, or by periodically misting the surface with water. Proper curing is critical for the concrete to reach its designed strength and durability.

Open this step in the guide

Every video in How to Pour a Concrete Landing Pad for Deck Stairs

1. Step 1: Excavate Area

   • 13:17–15:33 Prepare Stair Base and Pour Concrete Pad
   • 0:04–0:15 Site Preparation and Trench Digging
   • 4:20–8:36 Prepare & Pour Concrete Pad

2. Step 2: Install Formwork

   • 2:04–2:33 Build and Position Concrete Form
   • 0:33–0:47 Formwork Installation
   • 0:00–0:34 Lay Out and Assemble Initial Form Boards

3. Step 3: Add and Compact Gravel Base

   • 2:21–2:33 Add & Compact Basecourse
   • 3:15–4:05 Lay and Compact Gravel Base
   • 0:20–0:38 Prepare Gravel Base

4. Step 4: Place Rebar or Wire Mesh

   • 2:45–3:06 Add Steel Reinforcement (Rebar)
   • 1:30–1:40 Add Wire Mesh Reinforcement
   • 5:41–6:46 Rebar Placement for Reinforcement

5. Step 5: Mix and Pour Concrete

   • 0:30–0:42 Pour and Level Concrete
   • 3:10–3:41 Pour and Screed Concrete
   • 1:58–2:31 Mix and Pour Concrete

6. Step 6: Screed the Concrete

   • 0:04–0:13 Screed the Concrete
   • 0:24–1:01 Screed the Concrete Surface
   • 0:17–0:45 Screed the Concrete Surface

7. Step 7: Float the Concrete

   • 0:16–0:25 Float the Concrete Surface
   • 0:44–0:46 Hand Float Concrete Surface
   • 1:15–1:29 Float Concrete

8. Step 8: Finish the Concrete

   • 0:07–0:11 Trowel for Smooth Concrete Finish
   • 10:04–11:22 Final Troweling and Finishing
   • 3:30–4:49 Concrete Floating and Troweling

9. Step 9: Cure the Concrete

   • 2:08–2:39 Cure Concrete
   • 0:57–0:59 Cure Concrete and Remove Forms
   • 5:50–6:12 Cure the Concrete (this video)

10. Step 10: Remove Formwork

    • 8:43–10:04 Remove Form and Backfill
    • 4:03–4:08 Remove Formwork
    • 0:52–0:54 Remove Formwork