powered by

How to Resurface Concrete and Make It Look New | Today's Homeowner with Danny Lipford

Video by Today's Homeowner with Danny Lipford · 1 moment used in Oak Valley Designs's DIY guides · 1:31 long

Moments in this video

  1. 1:16–1:25 Apply Textured Finish From How to Resurface Worn Concrete Steps, Step 5: Texture and Finish

    If a non-slip surface is desired for added safety and aesthetic appeal, wait a few minutes after applying the main resurfacer layer for it to begin setting up slightly. The ideal time is when the surface has lost its wet sheen but is still workable. Then, gently drag a fine-bristle broom across the surface in a consistent direction. This action will create a textured finish that provides better traction and a decorative, broom-finished concrete look. Once the desired texture is achieved, allow the resurfacer to fully cure according to the product's instructions before walking or driving on it. This curing process is critical for durability.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

How to Resurface Concrete and Make It Look New | Today's Homeowner with Danny Lipford — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.