powered by

CONCRETE REPAIR/PATCHES (Part 8) Mike Haduck (Sidewalks)

Video by Mike Haduck Masonry · 1 moment used in Oak Valley Designs's DIY guides · 9:21 long

Moments in this video

  1. 2:52–3:20 Apply and Level Patching Compound From How to Resurface Worn Concrete Steps, Step 2: Repair Cracks and Damage

    Carefully transfer the mixed patching compound into the spalled areas and cracks. Use a trowel to spread and compact the material, ensuring it fills all voids and is pressed firmly against the existing concrete. Level the new compound with the surrounding concrete surface, smoothing it out to match the contour as much as possible.

The guide that use this video

Transcript

0:05 yesterday i patched up this sidewalk i'm gonna show you how i did it well today we got a broken sidewalk you see it it's broke here it's broke up over there so what we're gonna do is clean this all up and patch it up the first thing we're gonna do is get rid of everything that's loose here and it's all dirt down here get down like a dentist right down to the good stuff so high will take that off there like that

1:14 get it all out of here with the brush yes we can and the same with this side i'm gonna dig everything that's loose up it ain't loose i'm not gonna bother see that i can think of all this out of here what happens is this gets a hole in it the water sits here in the winter and it rocks it away that's like concrete rots in our area concrete it's good for about 25-30 years then it's ready for replacement now we're gonna wash this all out of here everything looks out

2:02 okay i'm all set i put plastic down here because i don't want one block of concrete touching the other block of concrete and it's like a lubricant between them so when it cracks it's got to crack along the plastic i'm using a rapid set mortar mix and i'm going to mix that up and use that yeah the water don't forget this stuff don't forget this stuff goes fast you can't fool around with it you gotta mix it you gotta be ready and you gotta put it in that's about it now we're gonna put it in but i'm making sure it's wet just like that make sure this is down

2:50 here get it in there slash it around just like that and i'm going to show you one of the problems i got it's all in i got my little edger and i'm edging it

3:40 now here's one of the problems see where the plastic is i got a bump here so i'm gonna build this section up but i'm going to give this a little chance to dry and do the other one and then i'll come back to it fill it in the other one got to make sure that's wet you want wrap and you got to push it in there see that push it in make sure it sticks and if you want to use some bricks or stones or something to fill in instead of using all rapid set you do that too you got to be a little honest about it it patches a patch of the patches of patch that's the way you got to look at it what are you doing

4:26 how long do you expect it to last gotta ask those questions now i'm back at the first one starting to harden up good that's what i want not going to get crazy with it i'm just going to get a sponge like that and just go over the top of it blend it in the best i can [Music] just like that that's all we're gonna do blend it in

5:11 yeah we're blending it in [Music] i'm gonna do uh something to do with the mud trick later [Applause] see that blending it all in just like that no big deal still a little bit moving that's okay that's what we want now if you've been watching my videos i go to my dad's garden and i get some nice mud and i paint over it with the mud that's going to stain that a little bit like that see that now that stains that

6:04 people ain't going to notice it that much you see i mean just like that yeah mud trick the same thing on this side i want to get it down even with the other sidewalk i just want to blend it in that's it see that blended into the other sidewalk patches of patches of patches of patch but you do try to do the best you can make it except what's acceptable just like that [Applause]

6:50 same thing a little mud on it [Applause] stain that up a little bit no big deal now i'm just gonna cut the plastic away then if you want to cut the plastic way and run the knife through that leaves a little space there so that's it now i brought this sidewalk up even with that sidewalk

7:37 so there's smooth and there's no tripping hazard so i'm just gonna paint the whole sidewalk let it all kind of sink in there all it is is what that's it i just mudded it all up a little part over there we'll check it in a few days and see what happens so that's it we're back a day later used a mud trick and it kind of blended in there pretty good so that's about it so we'll talk about that job a little bit uh the reason i use the mud trick is because if you put it in there and you let it dry it's like a big blinker you can see all the bad spots when you paint it with

8:23 mud it comes out a heck of a lot better and if you have to wait a day or two and put more mud on top of it to match it it usually helps it's not a perfect match but it it helps a lot that mortar mix i use is uh the rapid set it's like a concrete they use it for highways and everything i don't know why they call it mortar mix because if i put regular mortar in there and fall apart in one year so i hope these uh videos help thanks for watching i'm mike haddock until next video

9:09 [Music] you

Automatically transcribed from the source video.

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

CONCRETE REPAIR/PATCHES (Part 8) Mike Haduck (Sidewalks) — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.