Verify Power Off

What happens in this clip

Using a non-contact voltage tester, first verify that electrical power is flowing to the light fixture by observing the tester's indicator (e.g., beeping or flashing). Next, locate and turn off the appropriate circuit breaker in your electrical panel that controls this specific light fixture. After switching off the power, re-test the wires at the fixture with the non-contact voltage tester to confirm that no current is detected, ensuring it is safe to proceed.

Goal: Ensure electrical safety before beginning work.

What's used

Tools

• Non-contact Voltage Tester
• Step Ladder
• Scaffolding

About the full video

This project guides you through upgrading existing exterior light fixtures to enhance your home's curb appeal. It covers safe power disconnection, identifying electrical wiring, installing new mounting brackets, connecting wires, securing the fixture, choosing the right light bulbs for aesthetic appeal, and discusses special considerations for multiple fixtures controlled by a single switch.

Step 1 of 13: Turn Off Power

Locate the appropriate circuit breaker in your electrical panel that controls the light fixture. Flip the breaker to the 'OFF' position to cut off power to the fixture. It is crucial to verify that the power is off by attempting to turn on the light switch; it should not illuminate.

Open this step in the guide

Other videos for this step

• Turn Off Power at the Breaker
• Cut Power at the Breaker