Remove Light Bulbs
From Light Fixture Replacement · Step 4 of 13 · Video by iScaper1
Showing 0:55–1:06 of the source video.
What happens in this clip
Before removing the entire light assembly, carefully unscrew and remove both light bulbs from their sockets. This precaution prevents the bulbs from breaking if the fixture is accidentally dropped during subsequent steps.
Goal: Prevent accidental damage to light bulbs.
What's used
Tools
- Light Bulbs
About the full video
This project guides you through replacing a faulty motion light sensor on an outdoor light fixture. The process involves safely disconnecting power, disassembling the old fixture, wiring the new sensor with the existing light arms, reassembling, and then adjusting the sensor's settings for optimal performance.
Step 4 of 13: Remove Bulbs
With the cover removed, carefully unscrew each light bulb counter-clockwise. Place the bulbs in a safe location where they will not be damaged or roll away.
Other videos for this step
Light Fixture Replacement
This project involves safely removing an existing light fixture in a two-story stairwell and installing a new one. Due to the height and electrical work involved, safety precautions are paramount.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.