Install New Bulbs and Restore Power
From Light Fixture Replacement · Step 11 of 13 · Video by fordummies
Showing 1:17–1:23 of the source video.
What happens in this clip
With the new fixture securely mounted, screw in the new light bulbs into the sockets. Depending on your fixture, you may also need to attach the light bulb cover. Once the fixture is fully assembled, return to your electrical panel and flip the circuit breaker back to the 'ON' position to restore power. Test your new light fixture to ensure it works correctly.
Goal: Complete the installation and test the new fixture.
What's used
Tools
- Circuit breaker
- New light bulbs
About the full video
This project provides step-by-step instructions on how to safely replace an existing ceiling light fixture with a new one. It covers crucial safety precautions like turning off power and testing wires, disconnecting the old fixture, connecting the new wiring, and finally mounting the new fixture and restoring power.
Step 11 of 13: Install New Fixture Cover and Bulbs
Once the fixture is securely mounted, attach the new fixture's cover or globe, securing it with the provided screws or clips. Then, screw in the appropriate type and wattage of light bulbs as specified by the fixture manufacturer.
Other videos for this step
Light Fixture Replacement
This project involves safely removing an existing light fixture in a two-story stairwell and installing a new one. Due to the height and electrical work involved, safety precautions are paramount.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.