Turn Off Power at the Breaker

What happens in this clip

Before starting any electrical work, always prioritize safety by turning off the power to the circuit you will be working on. Locate your electrical panel (breaker box) and identify the correct breaker for the light fixture. Flip the breaker to the 'off' position. To prevent accidental power restoration, place a piece of tape over the switched-off breaker and write 'DO NOT TURN ON' on it. This ensures that no one else in the household can inadvertently turn the power back on while you are working, preventing electrical shock.

Goal: Safely de-energize the circuit for the light fixture.

What's used

Tools

• Electrical Panel/Breaker Box
• Warning Tape

About the full video

This video provides a detailed, step-by-step guide on how to safely replace an outdoor light fixture with a new one, emphasizing electrical safety precautions and proper weatherproof wiring techniques. The process includes turning off power at the breaker, safely disconnecting the old fixture, preparing electrical wires, installing a new mounting bracket, connecting wires, and securely mounting the new fixture, with a special note on addressing non-flush electrical boxes for weatherproofing.

Step 1 of 13: Turn Off Power

Locate the appropriate circuit breaker in your electrical panel that controls the light fixture. Flip the breaker to the 'OFF' position to cut off power to the fixture. It is crucial to verify that the power is off by attempting to turn on the light switch; it should not illuminate.

Open this step in the guide

Other videos for this step

• Verify Power Off
• Cut Power at the Breaker