Restore Power and Test
From Light Fixture Replacement · Step 12 of 13 · Video by The Home Depot
Showing 2:11–2:21 of the source video.
What happens in this clip
For the final step, return to the electrical panel and flip the breaker switch back to the 'on' position to restore power to the circuit. Then, proceed to the light switch in the room and flip it on to activate the newly installed light fixture. Observe the light to ensure it is functioning correctly and providing the desired illumination.
Goal: Verify the new light fixture is functioning correctly
What's used
Tools
- Electrical Panel
- Light Switch
About the full video
This project provides a step-by-step guide on how to safely replace an existing ceiling-mounted light fixture with a new one. It covers unboxing, safely disconnecting power, removing the old fixture, installing the new mounting bracket, wiring the new fixture, and finally assembling and testing the new light.
Step 12 of 13: Restore Power and Test
Return to the electrical panel and flip the circuit breaker back to the 'ON' position. Go to the light switch and turn on the new fixture to ensure it operates correctly. Check for any flickering or issues.
Other videos for this step
Light Fixture Replacement
This project involves safely removing an existing light fixture in a two-story stairwell and installing a new one. Due to the height and electrical work involved, safety precautions are paramount.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.