Mount Handrail

What happens in this clip

Once all the handrail brackets are securely mounted to the wall, carefully rest the handrail on top of them. Using a pencil, mark the exact locations on the underside of the handrail where the screw holes from the brackets align. Remove the handrail, then use your power drill with the 3/16 inch drill bit to pre-drill pilot holes into the bottom of the handrail at each marked spot. Finally, place the handrail back onto the brackets, align the pre-drilled holes, and use the supplied screws with your power drill to firmly tighten the handrail to each bracket, securing it in place.

Goal: Attach the handrail to the installed brackets

What's used

Tools

• 3/16 inch Drill Bit
• Handrail
• Pencil
• Power Drill

Materials

• Screws

About the full video

This project guides you through the process of installing wall-mounted handrail brackets and then securely attaching a handrail to them. It covers measuring for proper height, accurately marking bracket placements, ensuring structural backing, and finally mounting both the brackets and the handrail itself.

Step 7 of 8: Attach the Handrail to Brackets

Carefully place the handrail onto the brackets, ensuring it aligns with any pre-drilled holes or mounting points on the rail and brackets. Use the screws or bolts recommended by the handrail manufacturer to fasten the handrail to each bracket. Tighten all connections firmly but avoid overtightening, which could strip threads or damage the handrail.

Open this step in the guide

Other videos for this step

• Attach Handrail to Brackets
• Mount the Handrail to Brackets