Install Wedge Anchors
From Install Outdoor Handrail · Step 5 of 8 · Video by BikeWalk Provo
Showing 1:36–2:01 of the source video.
What happens in this clip
Once the holes are drilled, take a wedge anchor and ensure that the nut is positioned at the top of the threaded part to protect the threads during installation. Insert the wedge anchor into a drilled hole. Use a hammer to firmly tap the anchor down into the hole until it is as deep as it can go. Then, use a wrench to tighten the nut. As the nut is tightened, the wedge anchor will expand inside the concrete, creating a secure and permanent hold. Repeat this process for all remaining anchor holes.
Goal: Securely fasten the bike rack to the concrete surface
What's used
Tools
- Hammer
- Wedge Anchors
- Wrench
About the full video
This project provides step-by-step instructions on how to install a bicycle rack into concrete. It covers identifying the necessary tools and fasteners, drilling holes into the concrete, securely anchoring the bike rack, and important spacing guidelines for optimal functionality and accessibility.
Step 5 of 8: Install Concrete Anchors
Depending on the type of anchor (e.g., expansion anchors, wedge anchors, or screw anchors), follow the specific installation method. For expansion anchors, tap them into the hole and then tighten the bolt or nut to expand the anchor. For screw anchors, drive them into the hole using the appropriate tool. Ensure anchors are flush with or slightly below the concrete surface.
Other videos for this step
Install Outdoor Handrail
This project outlines the steps for installing a surface mount handrail on outdoor concrete steps. It covers selecting the appropriate handrail and hardware, preparing the concrete surface, marking and drilling holes, and securely mounting the handrail.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.