Drill Anchor Holes in Concrete

What happens in this clip

Using a powerful hammer drill equipped with a concrete-specific drill bit of the appropriate size for your chosen anchors (e.g., 5/8 inch for expansion bolts or all-thread rods), carefully drill holes at the marked locations. Ensure the drill bit penetrates the concrete to the required depth to achieve optimal holding power for the anchors. Maintain a steady hand and apply consistent pressure.

Goal: Create anchor holes in the concrete slab

What's used

Tools

• Concrete Drill Bit
• Hammer Drill

About the full video

This video provides a detailed overview of installing a Simpson Strong-Tie 6x6 Concealed Post Base (CPT66Z) into a concrete slab. It covers the process of marking and drilling anchor holes, cleaning these holes, and discusses the two primary anchoring methods: using all-thread rods with epoxy or traditional expansion bolts. The goal is to secure the post base for robust structural integrity while maintaining a clean, aesthetic appearance by concealing the attachment hardware, noting that this method does not involve wood screws for the primary bracket-to-base connection but uses dowel pins for the wood post itself.

Step 4 of 8: Drill Pilot Holes in Concrete

Select a masonry drill bit that matches the diameter specified for your chosen concrete anchors. Use a hammer drill for efficient drilling into the concrete. Drill to the depth recommended by the anchor manufacturer, ensuring the holes are perpendicular to the surface for a secure fit.

Open this step in the guide

Other videos for this step

• Drill Anchor Holes in Concrete
• Drill Anchor Holes in Concrete