Final Check
From Install Outdoor Handrail · Step 8 of 8 · Video by Optimum Works Inc.
Showing 5:36–5:45 of the source video.
What happens in this clip
After all brackets are installed and the handrail is securely attached, perform a final check. Gently apply pressure to different sections of the handrail to ensure it is sturdy and does not wobble. The installer confirms that the handrail is "very sturdy," indicating a successful installation. Address any loose points or concerns by tightening screws or reassessing the bracket attachment if necessary.
Goal: Verify handrail stability and security
What's used
Tools
- Installed Handrail Optimum Works
About the full video
This project provides a step-by-step guide on how to install a handrail on a staircase. The process involves accurately marking the handrail's height and angle, locating wall studs for secure bracket placement, drilling pilot holes, and then fastening the brackets and handrail using appropriate screws or bolts. An alternative method for securing brackets using drywall anchors when studs are not accessible is also demonstrated.
Step 8 of 8: Test Handrail Stability
Once all connections are tightened, test the handrail by applying steady, firm pressure in various directions. Push and pull on the handrail to check for any wobbling, looseness, or shifting. Ensure it feels solid and securely mounted to the concrete steps.
Other videos for this step
Install Outdoor Handrail
This project outlines the steps for installing a surface mount handrail on outdoor concrete steps. It covers selecting the appropriate handrail and hardware, preparing the concrete surface, marking and drilling holes, and securely mounting the handrail.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.