Wall Mounted Handrail Bracket Installation

Moments in this video

1. 0:40–1:07 Measure Handrail Height From Stair Handrail Installation, Step 1: Determine Handrail Height and Location

   Begin by determining the appropriate height for your handrail. This is typically dictated by local building codes, so ensure you consult them. Measure straight up from the front of the nosing (the edge of the step) on both the first and the last step where the handrail will begin and end. In this video, a height of 36 inches is used as an example. Mark these two locations on the wall with a Sharpie or pencil.

2. 2:19–2:52 Mount Handrail From Install Outdoor Handrail, Step 7: Attach the Handrail to Brackets

   Once all the handrail brackets are securely mounted to the wall, carefully rest the handrail on top of them. Using a pencil, mark the exact locations on the underside of the handrail where the screw holes from the brackets align. Remove the handrail, then use your power drill with the 3/16 inch drill bit to pre-drill pilot holes into the bottom of the handrail at each marked spot. Finally, place the handrail back onto the brackets, align the pre-drilled holes, and use the supplied screws with your power drill to firmly tighten the handrail to each bracket, securing it in place.

Guides that use this video

• Stair Handrail Installation
• Install Outdoor Handrail